Part Numbers - Ford 2006 Milan Owner's Manual

Ford milan
Table of Contents

Advertisement

• 3.0L DOHC V6 Duratec engine
3. Remove the air filter element from the air filter housing.
4. Wipe the air filter housing and cover clean to remove any dirt or
debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter
element edges between the air filter housing and cover. This could cause
filter damage and allow unfiltered air to enter the engine if not properly
seated.
6. Replace the air filter housing cover and secure the clamps.
Note: Failure to use the correct air filter element may result in severe
engine damage. The customer warranty may be voided for any damage to
the engine if the correct air filter element is not used.
MOTORCRAFT PART NUMBERS
Component
Air filter element
Battery
4
Oil filter
Oil Filter O-Ring
PCV valve
Spark Plugs
1
The PCV valve is a critical emission component. It is one of the items
listed in scheduled maintenance information and is essential to the
life and performance of your vehicle and to its emissions system.
For PCV valve replacement, see your authorized dealer. Refer to
scheduled maintenance information for the appropriate intervals for
changing the PCV valve.
2006 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
2.3L I4 engine
FA-1683
BXT-40R
3
FL2017 A
or FL910
3
1S7G-6885–AC
1
2
3.0L DOHC V6 Duratec
engine
FA-1771
BXT-40R
FL-820-S
N/A
241

Advertisement

Table of Contents
loading

Table of Contents