Digital Audio Broadcasting - Ford Fiesta Owner's Manual

2. Select AUDIO or AUDIO SETTINGS.
3. Scroll to RDS REGIONAL and turn on
or off with the OK button.
4. Press the MENU button to return.
DIGITAL AUDIO
BROADCASTING
Note: Coverage differs from region to region
and will influence the quality of reception.
It is broadcast nationwide, regionally and
locally.
The system allows you to listen to Digital
Audio Broadcast (DAB) radio stations.
The following formats are supported:
• DAB
• DAB+
• DMB-Audio.
Ensembles
Note: When you tune from one ensemble
to another, it can take a while until the
system synchronises to the other ensemble.
The audio mutes during synchronisation.
Stations are grouped within ensembles.
Each ensemble can consist of several
different stations.
When listening to a station, you can also
display the ensemble name if required by
pressing function button 2. The station
name displays below the ensemble name.
Selecting Radio Band
DAB1 and DAB2 operate in the same way.
You can store up to 10 different presets on
each band.
1. Press the RADIO button.
2. Press the left arrow button to display
the available wavebands.
3. Select DAB1 or DAB2.
Audio System
Station Tuning Control
Note: When you reach the first or last
station within an ensemble, further tuning
will skip to the next ensemble. There may
be a delay during this change and the audio
will briefly mute.
Press the RADIO button and select DAB1
or DAB2. Both preset banks operate in the
same way and can store up to 10 different
preset stations.
Seek Tuning
1. Select a station.
2. Press a seek button. The radio will stop
at the first station it finds in the
direction chosen.
Radio Station List
Note: Only the stations in the current
ensemble are shown in the display.
This feature displays all the available
stations in a list.
1. Select a station.
2. Press function button 1.
3. Press the up and down arrow buttons
to navigate to your required station.
4. Press OK to confirm your selection.
Manual Tuning
1. Select a station.
2. Press function button 2.
3. Press the left and right arrow buttons
to tune up or down the waveband in
small increments. Press and hold to
move through the waveband quickly.
4. Press OK to confirm your selection.
Scan Tuning
This feature allows you to listen to the first
few seconds of each station while
searching through a waveband.
205