Checking Mykey System Status; Using Mykey With Remote Start Systems; Mykey Troubleshooting - Ford 2013 Fusion Owner's Manual

CHECKING MYKEY SYSTEM
STATUS
The information display shows the
programmed keys' status:
• MYKEY DISTANCE: Tracks distance
when drivers use restricted keys. The
only way to delete the accumulated
distance is by using an admin key to
reset this to zero. If the MyKey distance
does not accumulate as expected,
then:
• The intended user is not using the
programmed key.
• An admin key user recently reset
the distance.

MYKEY TROUBLESHOOTING

Condition
I cannot program a key.
I cannot program the optional settings.
I cannot clear the restricted keys.
Fusion/Mondeo (CC7)
MyKey
• NUMBER OF MYKEY(S): Indicates
the number of restricted keys
programmed to the vehicle. Use this
feature to detect how many restricted
keys you have for your vehicle, or when
a MyKey has recently been deleted.
• NUMBER OF ADMIN KEY(S):
Indicates how many admin keys are
programmed to the vehicle. Use this
feature to determine how many
unrestricted keys you have for your
vehicle, or if an additional MyKey has
been programmed.
USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
· The key in the ignition does not have admin
privileges.
· The key in the ignition is the only admin
key (there always has to be at least one
admin key).
· The intelligent access key is not in the
backup slot (vehicles with push-button
start).
· SecuriLock passive anti-theft system is
disabled or in unlimited mode.
· The key in the ignition does not have admin
privileges.
· No keys are programmed to the vehicle.
See Creating a MyKey (page 49).
· The key in the ignition does not have admin
privileges.
50
Potential Causes