Ford 2014 MUSTANG Owner's Manual

Ford 2014 MUSTANG Owner's Manual

Ford mustang
Hide thumbs Also See for 2014 MUSTANG:
Table of Contents

Advertisement

Quick Links

2014
fordowner.com
ford.ca
|
|
|
|
|
ER3J 19A321 AA
December 2012
First Printing
Owner's Manual
Mustang
Litho in U.S.A.

Advertisement

Table of Contents
loading

Summary of Contents for Ford 2014 MUSTANG

  • Page 1 2014 fordowner.com ford.ca ER3J 19A321 AA December 2012 First Printing Owner’s Manual Mustang Litho in U.S.A.
  • Page 2: Table Of Contents

    Table of Contents Introduction Child Safety Child seat positioning ........19 Booster seats .
  • Page 3 Table of Contents Locks Locking and unlocking ........65 Interior luggage compartment release .
  • Page 4: Table Of Contents

    Table of Contents Instrument Cluster Gauges ..........92 Warning lamps and indicators .
  • Page 5 Table of Contents Storage Compartments Center console ........153 Starting and Stopping the Engine Ignition switch .
  • Page 6: Table Of Contents

    Table of Contents Cruise Control Driving Aids Steering ..........192 Load Carrying Vehicle loading .
  • Page 7 Table of Contents Maintenance General information ........238 Opening and closing the hood .
  • Page 8: Table Of Contents

    Accessories .........313 Ford Extended Service Plan Scheduled Maintenance Normal scheduled maintenance and log .
  • Page 9 Errors and omissions excepted. © Ford Motor Company 2012 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012...
  • Page 10: Introduction

    Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
  • Page 11 Introduction SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert...
  • Page 12 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may...
  • Page 13 For U.S. only (if equipped), if you choose to use the SYNC® Vehicle Health Report, you consent that certain diagnostic information may also be accessed electronically by Ford Motor Company and Ford authorized service facilities, and that the diagnostic information may be used for any purpose.
  • Page 14 EDR. Ford Motor Company and Ford of Canada do not access event data recorder...
  • Page 15 See www.dtsc.ca.gov/hazardouswaste/perchlorate for more information. FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business.
  • Page 16 Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty. Damage caused to your vehicle as a result of the failure of non-Ford parts may not be covered by the Ford Warranty. For additional information, see the terms and conditions of the Ford Warranty.
  • Page 17 WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
  • Page 18: Child Safety

    NHTSA and other safety organizations, or are the minimum requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician and consulting your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle.
  • Page 19 Child Safety Recommendations for Safety Restraints for Children Recommended Child size, height, weight, or age restraint type Small Children who have outgrown or no longer Use a children properly fit in a child safety seat belt-positioning (generally children who are less than booster seat.
  • Page 20: Child Seat Positioning

    Child Safety CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back.
  • Page 21 Child Safety WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. WARNING: To avoid risk of injury, do not leave children, unreliable adults, or pets unattended in your vehicle.
  • Page 22: Booster Seats

    Child Safety BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
  • Page 23 Child Safety Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat.
  • Page 24 Child Safety Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder.
  • Page 25: Installing Child Seats

    Child Safety INSTALLING CHILD SEATS Child Seats Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat.
  • Page 26 Child Safety • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
  • Page 27 Child Safety 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until...
  • Page 28 There should be no more than 1 inch (2.5 centimeters) of movement for proper installation. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed.
  • Page 29 Child Safety Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
  • Page 30 Child Safety Your vehicle has LATCH lower anchors for child seat installation at the seating positions marked with the child seat symbol. The LATCH anchors are located at the rear section of the rear seat between the cushion and seat back below the symbols as shown.
  • Page 31 Child Safety The tether strap anchors in your vehicle are in the following positions (shown from top view): Perform the following steps to attach a child safety seat to the tether anchor: For coupe: 1. Route the tether strap over the top of the head restraint. 2.
  • Page 32 Child Safety For convertible: 1. Route the child safety seat tether strap over the top of the head restraint. The tether anchors are located rearward of the seat back in the convertible top sling. Note: For easier access, attach the tether with the convertible top up.
  • Page 33 If the safety seat is not anchored properly, the risk of a child being injured in a collision greatly increases. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. 2014 05+ Mustang (197)
  • Page 34: Safety Belts

    Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving.
  • Page 35 Safety Belts WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather;...
  • Page 36: Fastening The Safety Belts

    Safety Belts The safety belt pretensioners are designed to activate in frontal, near-frontal and side crashes. The safety belt pretensioners at the front seating positions are designed to tighten the safety belts firmly against the occupant’s body when activated. This helps increase the effectiveness of the safety belts.
  • Page 37 Safety Belts 2. To unfasten, press the release button and remove the tongue from the buckle. Restraint of Pregnant Women WARNING: Always ride and drive with your seat back upright and the safety belt properly fastened. The lap portion of the safety belt should fit snug and be positioned low across the hips.
  • Page 38 Safety Belts WARNING: The belt and retractor assembly must be replaced if the safety belt assembly automatic locking retractor feature or any other safety belt function is not operating properly when checked by an authorized dealer. Failure to replace the belt and retractor assembly could increase the risk of injury in crashes.
  • Page 39 Safety Belts How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
  • Page 40: Safety Belt Warning Light And Indicator Chime

    Safety Belts SAFETY BELT WARNING LIGHT AND INDICATOR CHIME This lamp illuminates and an audible warning will sound if the driver’s safety belt has not been fastened when the vehicle’s ignition is turned on. Conditions of Operation If... Then... The driver’s safety belt is not The safety belt warning light buckled before the ignition illuminates 1-2 minutes and the...
  • Page 41 Safety Belts If... Then... The driver’s and front The Belt-Minder® feature will not passenger’s safety belts are activate. buckled before the ignition switch is turned to the on position or less than 1-2 minutes have elapsed since the ignition switch has been turned to on...
  • Page 42 Safety Belts Note: The driver and front passenger Belt-Minder® are deactivated and activated independently. When deactivating or activating one seating position, do not buckle the other position as this will terminate the process. Note: If you are using MyKey®, the Belt-Minder® cannot be disabled. Also, if the Belt-Minder®...
  • Page 43: Child Restraint And Safety Belt Maintenance

    Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.
  • Page 44: Personal Safety System

    Personal Safety System PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
  • Page 45: Supplementary Restraints System

    Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
  • Page 46 Supplementary Restraints System WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries.
  • Page 47: Driver And Passenger Airbags

    Supplementary Restraints System SOS POST-CRASH ALERT SYSTEM™ The system flashes the turn signal lamps and sounds the horn (intermittently) in the event of a serious impact that deploys an airbag equipped on your vehicle, such as front, side, side curtain or Safety Canopy®.
  • Page 48 Supplementary Restraints System The driver and passenger front airbag system consists of: • driver and passenger airbag modules • crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag Indicator later in this chapter. • front passenger sensing system Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches...
  • Page 49: Front Passenger Sensing System

    Supplementary Restraints System Children and Airbags WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back.
  • Page 50 Supplementary Restraints System WARNING: To reduce the risk of possible serious injury: Do not stow objects in seat back map pocket or hang objects off seat back if a child is in the front passenger seat. Do not place objects underneath the front passenger seat or between the seat and the center console.
  • Page 51 Supplementary Restraints System • If the child restraint has been installed and the indicator lamp is not lit, then turn your vehicle off, remove the child restraint from your vehicle and reinstall the restraint following the child restraint manufacturer’s instructions. The front passenger sensing system is designed to enable (may inflate) the front passenger’s frontal airbag anytime the system senses that a person of adult size is sitting properly in the front passenger seat.
  • Page 52 Supplementary Restraints System If you think that the status of the passenger airbag off indicator lamp is incorrect, check for the following: • objects lodged underneath the seat • objects between the seat cushion and the center console (if equipped) •...
  • Page 53: Side Airbags

    Supplementary Restraints System If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center at the phone number shown in the Customer Assistance section of this owner’s manual.
  • Page 54: Crash Sensors And Airbag Indicator

    Supplementary Restraints System The system consists of the following: • a tag on the seat back indicating that side airbags are found on your vehicle • side airbags located inside the seat back of the driver and front passenger seats. •...
  • Page 55: Airbag Disposal

    Supplementary Restraints System The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. See the Instrument Cluster chapter.
  • Page 56: Keys And Remote Control

    Keys and Remote Control GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 57 Keys and Remote Control Note: If the vehicle is not equipped with active anti-theft system, locking the driver door with the key does not lock the passenger door. Use the power door lock, remote control or manually lock the passenger door to ensure the vehicle is properly secured.
  • Page 58: Replacing A Lost Key Or Remote Control

    Keys and Remote Control Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the key ring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2) from the transmitter if it does not come off with the battery cover.
  • Page 59: Mykey

    MyKey PRINCIPLES OF OPERATION MyKey® allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as an administrator key or admin key which can be used to: •...
  • Page 60: Creating

    MyKey Optional Settings These settings can be configured right after a MyKey is first created or changed afterward with an admin key. • Vehicle speed limit of 80 mph (130 km/h). Visual warnings are displayed followed by an audible tone when vehicle speed has reached 80 mph (130 km/h).
  • Page 61 MyKey 4. Press OK to select CREATE MYKEY. 5. Hold OK as prompted until you see MARK THIS KEY AS RESTRICTED. The key is successfully programmed. Make sure you label it so you can distinguish it from the admin keys. To program optional settings for the key(s), see the Programming/Changing Optional Settings chapter.
  • Page 62: Clearing

    MyKey is NOT compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see your Ford authorized dealer for a Ford-approved remote start system. The following information MAY help customers who choose to use a non-Ford-approved remote start system.
  • Page 63 MyKey if the remote start fob is used by the MyKey driver. To program a non-Ford-approved remote start system as a MyKey, do the following: 1. Enter the vehicle and close all doors.
  • Page 64: Troubleshooting, Mykey

    MyKey MYKEY TROUBLESHOOTING Condition Potential Causes • The key in the ignition does not have admin I cannot program a key. privileges. • The key in the ignition is the only admin key (there always has to be at least one admin key).
  • Page 65 MyKey Condition Potential Causes • The vehicle has a remote start system that I accidentally programmed all keys is recognized as an admin key. See the Using as restricted keys. MyKey with Remote Start System chapter to reset all restricted keys using remote start. •...
  • Page 66: Locks

    Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A.
  • Page 67 Locks Opening the Trunk Press the button twice within three seconds to open the trunk. Make sure the trunk is closed and latched before driving your vehicle. An unlatched trunk may cause objects to fall out or block the driver’s rear view.
  • Page 68 Locks Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened. Enabling or Disabling Autolock and Autounlock Note: The autolock and autounlock features can be activated or deactivated independently of each other: •...
  • Page 69 Locks TRUNK RELEASE The remote trunk release button is located on the center console. Press the button to unlatch the trunk. Interior Trunk Control Lockout (Convertible Vehicles Only) This feature disables the interior trunk control. It helps prevent unauthorized access to the trunk when the convertible top is open. To disable the interior trunk control: 1.
  • Page 70: Interior Luggage Compartment Release

    Locks INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and risk injury. Children should be taught not to play in vehicles. WARNING: Do not leave children, unreliable adults, or animals unattended in the vehicle.
  • Page 71: Security

    Security SECURILOCK® PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting the engine.
  • Page 72 Security Replacement Keys Note: Your vehicle comes with two integrated keyhead transmitters. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control. A maximum of eight coded keys can be programmed to your vehicle;...
  • Page 73: Anti-Theft System

    Security 7. After three seconds but within 20 seconds of turning the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. 8. Turn the ignition from off to on. Keep the ignition on for at least six seconds.
  • Page 74 Security Full Monitor Mode To monitor the following: • Doors • Hood • Trunk • Movement inside the vehicle (for convertible models, top must be fully closed) • Change in vehicle inclination (such as unwanted towing) Lock the vehicle using the remote control or the power door lock control with the accompanying door open and then close all doors.
  • Page 75 Security Each door, the hood or the trunk is armed individually, and if any are open, they must be closed for the system to enter the 20 second countdown. The turn signal lamps will flash once when all doors, the hood and the trunk are closed indicating the vehicle is locked and entering the 20 second countdown.
  • Page 76: Steering Wheel Controls

    Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2.
  • Page 77 Steering Wheel Press the media button repeatedly to scroll through available audio modes. Press the seek buttons to select the next or previous stored preset or track. Press and hold to select the next or previous frequency or seek through a track. VOICE CONTROL (IF EQUIPPED) A.
  • Page 78 Steering Wheel INFORMATION DISPLAY CONTROL Type 1 Type 2 See the Information Displays chapter. 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 79: Wipers And Washers

    Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
  • Page 80: Windshield Washers

    Wipers and Washers WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty.
  • Page 81: Lighting

    Lighting LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams • Push the lever toward the instrument panel to activate. • Pull the lever toward you to deactivate. Headlamp Flasher •Pull toward you slightly to activate and release to deactivate.
  • Page 82: Autolamps

    Lighting AUTOLAMPS (If equipped) WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the headlamp control is in the autolamp position, the exterior lamps will turn on after a brief delay and will remain on until the wipers are turned off.
  • Page 83: Headlamp Exit Delay

    Lighting Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer switch requires re-calibration. Rotate the dimmer switch from the full dim position to the full dome On position to reset. This will ensure that your displays are visible under all lighting conditions.
  • Page 84: Daytime Running Lamps

    Lighting DAYTIME RUNNING LAMPS (IF EQUIPPED) WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.
  • Page 85: Direction Indicators

    Lighting DIRECTION INDICATORS • Push down to activate the left turn signal. • Push up to activate the right turn signal. Note: An outage of any front turn signal lamp or the inner most of the three-compartment rear turn signal lamps will result in a rapid flash rate. INTERIOR LAMPS Dome/Map lamps The dome lamp lights when:...
  • Page 86: Windows And Mirrors

    Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
  • Page 87 Windows and Mirrors Bounce-Back The window will stop automatically while closing and reverse some distance if there is an obstacle in the way. Overriding the Bounce-Back Feature WARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury.
  • Page 88: Exterior Mirrors

    Windows and Mirrors Manual Override The rear quarter window switch will not operate when: • the convertible top is moving • the convertible top is not completely up or down. The rear quarter windows can be manually raised if the switch does not operate when the convertible top is completely up or down.
  • Page 89 Windows and Mirrors Pony Projection Lights (If Equipped) Note: Moisture, frost and ice build-up (or other types of contamination) on the surface of the light lens can cause some non-permanent distortion or reduced brightness of the image. Do not use abrasive materials to clean the lens.
  • Page 90: Interior Mirrors

    Windows and Mirrors The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A).
  • Page 91: Sun Visors

    Windows and Mirrors SUN VISORS Slide-On-Rod Rotate the visor toward the side window and extend it rearward for extra sunlight coverage. Retract the visor before moving it back toward the windshield and storing it. Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 92: Sunshade

    Windows and Mirrors Flexible Visor Storage System The system can accommodate various storage accessories. A sunglasses clip and multi-function clip are provided. To attach one of the accessories, do the following: 1. Insert the provided removal tool (on the accessory holder) or a coin into the slot on the plug and rotate one-quarter turn in either direction to remove.
  • Page 93: Instrument Cluster

    Instrument Cluster GAUGES Type 1 Cluster shown in standard measure. Metric similar. A. Speedometer B. Fuel gauge C. Engine coolant temperature gauge D. Tachometer E. Information display. See Information displays for more information. Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on).
  • Page 94 Instrument Cluster Engine Coolant Temperature Gauge Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. WARNING: Never remove the coolant reservoir cap while the engine is running or hot.
  • Page 95: Warning Lamps And Indicators

    Instrument Cluster Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. The fuel icon and arrow indicates which side of the vehicle the fuel filler door is located.
  • Page 96 Instrument Cluster Brake System Warning Light To confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the on position when the engine is not running, or in a position between on and start, or by applying the parking brake when the ignition is turned to the on position.
  • Page 97 Instrument Cluster High Beams Illuminates when the high beam headlamps are on. Low Fuel Illuminates when the fuel level in the fuel tank is at or near empty. Low Tire Pressure Warning Illuminates when your tire pressure is low. If the light remains on at start-up or while driving, the tire pressure should be checked.
  • Page 98 Instrument Cluster Service Engine Soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the service engine soon light will stay on until the engine is cranked, then turn itself off if no malfunctions are present.
  • Page 99: Audible Warnings And Indicators

    Instrument Cluster Stability Control System Off Illuminates when AdvanceTrac®/Traction control has been disabled by the driver. Turn Signal Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the indicators stay on or flash faster, check for a burned out bulb.
  • Page 100: Information Displays

    GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 101 Information Displays MYKEY MILES (km) For more information, see the MyKey® chapter. MILES (km) TO E This displays an estimate of approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition off when refueling to allow this feature to correctly detect the added fuel.
  • Page 102 Information Displays RESET FOR SYSTEM CHECK When this message appears, press the RESET button and the information display will begin to cycle through the following systems and provide a status of the item if needed. 1. XXX% OIL LIFE 2. CHARGING SYSTEM 3.
  • Page 103 Information Displays STEERING FEEL This feature allows three modes of steering feel. Press RESET to cycle through the settings of: • STANDARD– Provides a balance between a comfort and sport feel. • SPORT– Slightly higher effort required for steering with more road force felt through the steering wheel.
  • Page 104 Information Displays HALO COLOR: You can select one of the preset colors for halo lighting. Note: Headlamps or parking lamps must be on to set up colors. To choose colors for the gauges, halo color or ambient lighting do the following: 1.
  • Page 105 Information Displays LANGUAGE = ENGLISH / SPANISH / FRENCH Allows you to choose which language for the information display. Selectable languages are English, Spanish, or French. Waiting four seconds or pressing the RESET button cycles through each of the language choices. Press and hold RESET for two seconds to set the language choice.
  • Page 106 Information Displays • Settings • Information †Gauge Mode Gauges Detail Air/Fuel Ratio Virtual gauge shown Vacuum inHG / Virtual gauge shown Boost psi (Shelby® GT500®) Cyl Head Virtual gauge shown Inlet Air Virtual gauge shown Oil Press. No virtual gauge available Oil Temp.
  • Page 107 Information Displays Fuel Economy Fuel Econ. Instant MPG (L/100km) mi (km) to E AVG MPG (L/100km) Fuel Hist.: shows Duration: 5 Minutes, 10 Minutes, 30 Minutes, Last 5 fuel usage as a Resets. The graph is updated each minute with the bar graph based fuel economy that was achieved during the prior 5, on time.
  • Page 108 Information Displays Settings Driver Assist Rear Park Aid On/Off Vehicle Autolamp Delay Off or XXX seconds Locks Autolock On/Off Autounlock On/Off Menu Control Standard: With standard set, pressing the up/down arrows from a lower level menu will escape to the main menu. Memory On: With memory on set, pressing the up/down arrows will navigate to the previous lower...
  • Page 109 Information Displays Settings Vehicle Dampers Sport / Normal (Shelby® GT500®) Steering Feel Standard Sport Sport Locked: This will display when AdvanceTrac® sport mode is on or when AdvanceTrac® and traction control are off. The steering feel will be locked in sport mode and steering feel will not be...
  • Page 110 Information Displays Settings †MyColor Gauge Color Ice Blue, White, Green, Purple, (if equipped) Blue, Orange, Red, MyColor 1, 2, 3 Halo Halo Light On/Off Halo Color Ice Blue, White, Green, Purple, Blue, Orange, Red, MyColor 1, 2, 3 Ambient Light Ambient Light On/Off Ambient Dim...
  • Page 111 Information Displays Settings Units English or Metric System Reset Hold OK to Reset System to Factory Default †The instrument cluster gauges are backlit white when the headlamps are off. When the headlamps are on, you can select one of the preset colors or MyColor 1, 2, 3 for the nighttime gauge backlighting.
  • Page 112 Information Displays Average MPG (L/100km) Shows the average distance traveled per unit of fuel used for a given trip. Odometer Registers the total mileage of the vehicle. VIRTUAL GAUGES Note: In order to provide real-time values, some gauges may display more value fluctuation than others during normal operation.
  • Page 113 Information Displays INLET AIR TEMP Displays the temperature of the air in the cold air inlet tube. OIL TEMP Displays the engine oil temperature. If the temperature rises to the red area, stop in a safe place and let the vehicle cool. If the problem persists, see your authorized dealer.
  • Page 114 Information Displays TRACK APPS (IF EQUIPPED) WARNING: Track Apps is for track use only. Remember that even advanced technology cannot defy the laws of physics. It is always possible to lose control of a vehicle due to inappropriate driver input for the conditions. Aggressive driving on any road condition can cause you to lose control of your vehicle increasing the risk of personal injury or property damage.
  • Page 115: Information Messages

    Information Displays Acceleration Timer Displays the vehicle’s rate of acceleration. 1. Choose desired speed or distance. 2. Choose Automatic Start or Countdown Start. 3. Follow the on-screen prompts. Brake Performance Displays the vehicle’s rate of deceleration. 1. Choose desired speed to start recording data. 2.
  • Page 116 Information Displays Alarm/Security Action / Description Messages TO STOP ALARM Displayed when the perimeter alarm system is armed and the vehicle is entered using the key START VEHICLE on the driver’s side door. In order to prevent the perimeter alarm system from triggering, the ignition must be turned to start or on before the 12 second chime expires.
  • Page 117 Information Displays Fuel Messages Action / Description CHECK FUEL FILL Displayed when the fuel fill inlet may not be properly closed. INLET Displayed as an early reminder of a low fuel FUEL LEVEL LOW condition. Key Messages Action / Description COULD NOT Displayed when an attempt is made to PROGRAM...
  • Page 118 Information Displays MyKey® Messages Action / Description MYKEY ACTIVE Displayed when MyKey® is active. DRIVE SAFELY ADVTRAC ON Displayed when a MyKey® is in use when trying to disable the AdvanceTrac® system MYKEY SETTING and the optional setting is on. Displayed when a MyKey®...
  • Page 119 Information Displays Park Aid Messages Action / Description CHECK REAR PARK Displayed when the transmission is in R (Reverse) and the park aid is disabled. Tire Messages Action / Description LOW TIRE Displays when one or more tires on your vehicle have low tire pressure.
  • Page 120 Information Displays Compass Zone Adjustment When something affects the compass readings, typically the compass corrects itself after a few days of operating your vehicle in normal conditions. If the compass still appears to be inaccurate, a manual calibration may be necessary. 1.
  • Page 121: Audio System

    Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed.
  • Page 122 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. •...
  • Page 123: Am/Fm Stereo With Cd/Mp3

    Audio System AM/FM/CD/SIRIUS SATELLITE RADIO •DIRECT TEXT MENU CLOCK # SEEK SCAN CAT/FOLD SOUND PHONE LOAD AM/FM TUNE SIRIUS WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
  • Page 124 Audio System Note: Autoset does not delete your original preset stations. Note: In order to re-run the autoset features, you must first turn it off before turning it back on. B. MENU: Press this button to access different audio features: •...
  • Page 125 Audio System I. AUX: Press this button to access media through your auxiliary input jack. If your vehicle is equipped with SYNC®, see the SYNC® chapter for more information. J. CD: Press the CD button to access CD and MP3 modes. •...
  • Page 126: Auxiliary Input Jack

    Audio System Q. DIRECT: • In radio mode, press this button to select the desired radio frequency (such as 93.9) using the memory preset numbers (0–9). • In SIRIUS mode, press this button to enter the desired channel (such as 002) using the memory preset buttons.
  • Page 127 Audio System WARNING: For safety reasons, do not connect or adjust the settings on your portable music player while your vehicle is moving. WARNING: Store the portable music player in a secure location, such as the center console or the glove box, when your vehicle is moving.
  • Page 128: Usb Port

    Audio System 6. Press AUX until LINE or LINE IN appears in the display. You should hear music from your device even if it is low. 7. Adjust the volume on your portable music player until it reaches the volume level of the FM station or CD. Do this by switching back and forth between the AUX and FM or CD controls.
  • Page 129: Satellite Radio Information

    Audio System SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS® broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS satellite radio channels, visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call SIRIUS at 1–888–539–7474.
  • Page 130 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
  • Page 131 Audio System Radio display Condition Possible action Invalid Channel The channel is no Tune to another longer available. channel or choose another preset. Unsubscribed Channel Your subscription does Contact SIRIUS at not include this 1–888–539–7474 to channel. subscribe to the channel, or tune to another channel.
  • Page 132: Climate Control

    Climate Control MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Defrost: Distributes air through the windshield defroster vents and demister vents. This setting can also be used to defog and clear the windshield of a thin covering of ice. B. Rear defrost: Turns the heated windows and mirrors off and on. See Heated windows and mirrors later in this chapter for more information.
  • Page 133 Climate Control D. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air. To improve air conditioning when starting your vehicle, drive with the windows slightly open for two to three minutes. E. Recirculated air: Press to switch between outside air and recirculated air.
  • Page 134: Navigation System Based Climate Control

    Climate Control DUAL ZONE AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH NAVIGATION SYSTEM) Note: To use the touchscreen controls, see the Touchscreen climate controls in the Navigation System chapter. A. CLIMATE: Control the system through the touchscreen display. See Touchscreen functions later in this section. B.
  • Page 135 Climate Control F. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently in the passenger compartment is being recirculated. Using recirculated air can reduce the time needed to cool the interior and reduce unwanted odors from entering your vehicle.
  • Page 136 Climate Control • Remove any snow, ice or leaves from the air intake area at the base of the windshield. • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start-up or until the vehicle has been aired out. •...
  • Page 137: Rear Window Defroster

    Climate Control • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start-up or until the vehicle has been aired out. • A small amount of air may be felt from the floor vent regardless of the air distribution setting that is selected.
  • Page 138: Cabin Air Filter

    Climate Control Heated Exterior Mirror (If Equipped) Note: Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass that has frozen in place. These actions could cause damage to the glass and mirrors. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum-based cleaning products.
  • Page 139: Seats

    Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.
  • Page 140: Head Restraints

    Seats • Keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 10 inches (250 millimeters) between your breastbone and the airbag cover. • Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. •...
  • Page 141 Seats To adjust the head restraint, do the following: Front Seat Head Restraints (If Equipped) The head restraints consist of: A. An energy absorbing head restraint B. Two steel stems C. Guide sleeve adjust and release button D. Guide sleeve unlock and remove button •...
  • Page 142 Seats Rear Seat Non-adjustable Outboard Head Restraints The second row outboard non-adjustable head restraints can be rotated forward to improve rear vision when there are no rear occupants. The non-adjustable head restraints consist of: A. a trimmed energy absorbing foam and structure B.
  • Page 143: Manual Seats

    Seats MANUAL SEATS WARNING: Do not adjust the driver’s seat or seat back while the vehicle is moving. WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged. Moving the seats backward and forward Recline adjustment 2014 05+ Mustang (197)
  • Page 144: Power Seats

    Seats WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. Adjusting the height of the driver’s seat POWER SEATS (IF EQUIPPED) WARNING: Never adjust the driver’s seat or seat back when the vehicle is moving.
  • Page 145: Heated Seats

    Seats Power Lumbar (If Equipped) The power lumbar control is located on the top of the driver’s seat side shield. Press one side of the control to increase lower back firmness. Press the other side of the control to decrease lower back firmness. HEATED SEATS (IF EQUIPPED) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord...
  • Page 146: Rear Seats

    Seats To operate the heated seats: • Press to activate. • Press again to deactivate. REAR SEATS Rear Seat Entry and Exit Use the seat back release to fold the back of the front seat forward for rear seat access. This release handle is located on the upper back of the front seat.
  • Page 147 Seats 2nd Row Seat/Split-Folding Rear Seat (If Equipped) WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its original position, pull on the seat back to make sure that it has fully latched.
  • Page 148: Universal Garage Door Opener (If Equipped) 147

    Universal Garage Door Opener (If Equipped) 147 HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S.
  • Page 149 148 Universal Garage Door Opener (If Equipped) Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
  • Page 150 Universal Garage Door Opener (If Equipped) 149 After programming the HomeLink button, follow Steps 5 – 7 as listed below to program your garage door opener. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener.
  • Page 151 150 Universal Garage Door Opener (If Equipped) Programming HomeLink® to a Genie Intellicode® 2 garage door opener Note: The Genie Intellicode® 2 transmitter must already be programmed to operate with the garage door opener. Programing the transmitters To program HomeLink® to the transmitter you must first put the transmitter into programming mode.
  • Page 152 Universal Garage Door Opener (If Equipped) 151 Programming HomeLink® to the Genie Intellicode® garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink® to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’s turn on.
  • Page 153: Auxiliary Power Points

    Auxiliary Power Points AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge.
  • Page 154: Storage Compartments

    Storage Compartments CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. Available console features include: • Cupholders in the front of the console (Pull the door open to access.) Remove the spacer from the cupholder to hold deeper cups.
  • Page 155: Starting And Stopping The Engine

    Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
  • Page 156: Ignition Switch

    Starting and Stopping the Engine IGNITION SWITCH A. Off: The ignition is off. Note: When you switch the ignition off and leave your vehicle, do not leave your key in the ignition. This could cause your vehicle battery to lose charge. B.
  • Page 157 Starting and Stopping the Engine Note: Do not touch the accelerator pedal. 1. Fully press the brake pedal. If your vehicle is equipped with a manual transmission, fully press the clutch pedal also. 2. Turn the key to the start position to start the engine. Release the key when the engine starts.
  • Page 158: Engine Block Heater

    Starting and Stopping the Engine Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects.
  • Page 159 Starting and Stopping the Engine • Make sure that when in operation, the extension cord plug and the heater cord plug connections are free and clear of water. This could cause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear of combustibles.
  • Page 160: Fuel And Refueling

    Fuel and Refueling SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
  • Page 161: Fuel Quality

    Fuel and Refueling • Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury.
  • Page 162: Running Out Of Fuel

    Fuel and Refueling Octane Recommendations • 3.7L V6 engine Regular unleaded gasoline with a pump (R+M)/2 octane rating of 87 is recommended. Some stations offer fuels posted as Regular with an octane rating below 87, particularly in high altitude areas. Do not use fuels with octane posted on pump below 87.
  • Page 163 Fuel and Refueling Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of a portable fuel container or aftermarket funnel into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto the ground instead of filling the tank, which could result in serious personal injury.
  • Page 164: Refueling

    Fuel and Refueling REFUELING WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island. • Turn off your engine when you are refueling. •...
  • Page 165: Fuel Consumption

    Fuel and Refueling 4. After you are done pumping fuel, slowly remove the fuel filler nozzle—allow about 10 seconds after pumping fuel before removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling the fuel tank.
  • Page 166 Fuel and Refueling For consistent results when filling the fuel tank: • Turn the ignition off before fueling; an inaccurate reading results if the engine is left running. • Use the same fill rate (low–medium–high) each time the tank is filled. •...
  • Page 167 Information are essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft® or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
  • Page 168 Fuel and Refueling Do not make any unauthorized changes to your vehicle or engine. By law, vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working.
  • Page 169 Fuel and Refueling Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced.
  • Page 170: Transmission

    Transmission AUTOMATIC TRANSMISSION (IF EQUIPPED) WARNING: Always set the parking brake fully and make sure the gearshift is latched in position P. Turn the ignition off and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
  • Page 171 Transmission Position S Moving the gearshift lever to position: • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking. • Provides additional lower gear operation through the automatic transmission shift strategy which reacts to vehicle inputs (vehicle acceleration, accelerator pedal, brake pedal and vehicle speed).
  • Page 172 Transmission Note: Some models have a blink feature (if equipped). If manually selecting a gear that is out of the current vehicle speed range, the vehicle will not make the requested shift and will blink the current gear. Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brakelamps are working.
  • Page 173 Transmission 3. Lift the center console upward to access the base of the gear shifter assembly and locate the brakeshift interlock override lever. 4. Press and hold the lever forward while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position.
  • Page 174: Manual Transmission

    Transmission MANUAL TRANSMISSION (IF EQUIPPED) Using the Clutch Manual transmission vehicles have a starter interlock that prevents starting the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2.
  • Page 175 Transmission Recommended Shift Speeds Note: Do not downshift into position 1 when your vehicle is moving faster than 15 mph (24 km/h). This may damage the clutch or transmission. Upshift according to the following charts. For the 3.7L V6 with 2.73 axle ratio, shift according to the following chart: Upshifts when accelerating (recommended for best fuel economy)
  • Page 176 Transmission Reverse Note: The gearshift lever can only be moved to position R by pushing the knob down before shifting to reverse. This is a lockout feature which protects the transmission from accidentally engaging position R when intending to select position 1. 1.
  • Page 177: Hill Start Assist

    Transmission AXLE INFORMATION Traction-Lok™ Axle (If Equipped) This axle provides added traction on slippery surfaces, particularly when one wheel is on a poor traction surface. Under normal conditions, the Traction-Lok™ axle functions like a standard rear axle. Extended use of other than the manufacturer’s specified size tires on a Traction-Lok™...
  • Page 178 Transmission This feature makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When this feature is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal.
  • Page 179 Transmission 5. Rotate the steering wheel at least one full turn to the right and return the steering wheel to the original starting position. 6. Rotate the steering wheel at least one full turn to the left and return the steering wheel to the original starting position. 7.
  • Page 180: Brakes

    Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out and should be inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, you should take it to an authorized dealer for inspection.
  • Page 181: Hints On Driving With Anti-Lock Brakes

    Brakes HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal. The anti-lock braking system will not eliminate the dangers inherent when: •...
  • Page 182: Traction Control

    Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
  • Page 183: Stability Control

    Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac®...
  • Page 184: Advancetrac

    Stability Control A Vehicle without AdvanceTrac® skidding off its intended route. B Vehicle with AdvanceTrac® maintaining control on a slippery surface. USING ADVANCETRAC® The system automatically is enabled when you start your engine. The electronic stability control portion of the system is disabled when the transmission is in position R or, on some models, if the stability control button is pressed and held for more than five seconds when the brakes are applied and the vehicle is at a stop.
  • Page 185 Stability Control AdvanceTrac® Features Button Icon Mode functions status Button pressed Sport mode twice; brakes Enabled Enabled (if equipped) applied Button pressed and held more AdvanceTrac® than 5 seconds; Disabled Disabled Disabled brakes applied; no throttle Button pressed AdvanceTrac® again after Enabled Enabled fully enabled...
  • Page 186: Parking Aids

    Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
  • Page 187 Parking Aids The system can be turned off using the information display control. See the Information Display chapter. If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on. Using the Rear Sensing System The rear sensors are only active when the transmission is in R.
  • Page 188: Rear-View Camera System

    Parking Aids REAR VIEW CAMERA SYSTEM (IF EQUIPPED) WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
  • Page 189 Parking Aids Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R. The system uses fixed guidelines which show the actual path the vehicle is moving in while reversing in a straight line.
  • Page 190 Parking Aids Guidelines Note: The guidelines are only available when the transmission is in R. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Yellow zone D. Fixed guideline: Green zone The fixed guidelines fade in and out depending on the steering wheel position.
  • Page 191: Cruise Control

    Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up or down a steep hill.
  • Page 192 Cruise Control Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press and hold SET+ or SET-. Release the control when you reach the desired speed.
  • Page 193: Driving Aids

    Driving Aids STEERING Electric Power Steering WARNING: Obtain immediate service if a system error is detected. You may not notice any difference in the feel of your steering, but a serious condition may exist. Failure to do so may result in loss of steering control.
  • Page 194 Driving Aids Selectable Steering Note: The steering setting defaults to standard if the battery is disconnected or removed. See the Information Displays chapter. You can select the desired steering feel using the information display control. The settings are: • Standard: Default factory setting. •...
  • Page 195: Load Carrying

    Load Carrying LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance.
  • Page 196 Load Carrying WARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available.
  • Page 197 Load Carrying Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) –...
  • Page 198 Load Carrying • Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 199 Load Carrying GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers –...
  • Page 200 Load Carrying Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
  • Page 201 Load Carrying • Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years.
  • Page 202: Towing

    Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
  • Page 203 Towing RECOMMENDED TOWING WEIGHTS Note: Do not tow with the Shelby GT500 model. It cannot tow a trailer. Note: Do not exceed the trailer weight for your vehicle configuration listed in the chart below. Note: Make sure to take into consideration trailer frontal area. Do not exceed 12 feet (1.11 meters ) trailer frontal area.
  • Page 204 Towing Hitches Do not use a hitch that either clamps onto the bumper or attaches to the axle. Distribute the trailer load so 10-15% of the total trailer weight is on the tongue. Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of your vehicle hitch.
  • Page 205 Towing When Towing a Trailer • Do not drive faster than 70 mph (113 km/h) during the first 500 miles (800 kilometers). • Do not make full-throttle starts. • Check your hitch, electrical connections and trailer wheel lug nuts thoroughly after you have traveled 50 miles (80 kilometers). •...
  • Page 206: Wrecker Towing

    We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
  • Page 207: Recreational Towing

    Towing The rear wheels (drive wheels) must be on a tow dolly when towing your vehicle from the front using wheel lift equipment. This prevents damage to the transmission. The front wheels should be on a tow dolly when towing your vehicle from the rear using wheel lift equipment.
  • Page 208: Convertible Top (If Equipped)

    Convertible Top (If Equipped) OPENING THE CONVERTIBLE TOP Note: Do not store articles behind rear seat. Articles stored in the convertible top stowage compartment may break the rear glass window when the top is opened. Note: Opening the convertible top when the top material is wet may cause mold or mildew.
  • Page 209 Convertible Top (If Equipped) 3. Unclamp the top from the windshield header by pulling each latch handle down and then rotating the latch to the rear until it clears the header. Note: If the top has not been opened for some time and sticks to the windshield header, push the front of the top up slightly with your hand to loosen it.
  • Page 210 Convertible Top (If Equipped) USING THE BOOT Installing the Boot WARNING: Always secure the retaining clips and boot straps on the vehicle or the boot may come loose while driving. Note: Be sure the boot is secure on the vehicle before driving. Improper installation can result in loss or damage of the boot.
  • Page 211 Convertible Top (If Equipped) Removing the Boot 1. Unhook the boot straps from the rear seat hooks. 2. Push the boot down unhooking the boot retaining clips. 3. Lift the boot off the vehicle. Storing the Boot 1. Position the boot right-side up and fold each side of the boot inward.
  • Page 212 Convertible Top (If Equipped) CLOSING THE CONVERTIBLE TOP Note: The convertible top will not operate unless the vehicle is stationary or traveling under 3 mph (5 kmh). Note: Make sure that the latch handles are pulled down and in the fully opened position before the top makes contact with the windshield header.
  • Page 213: Driving Hints

    Driving Hints BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early.
  • Page 214: Driving Through Water

    Driving Hints • Drive a heavily loaded vehicle or tow a trailer. • Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks).
  • Page 215: Floor Mats

    Driving Hints FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
  • Page 216 Driving Hints WARNING (Continued) • Check attachment of floor mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaning or replacement. • Always make sure that objects cannot fall into the driver footwell while the vehicle is moving.
  • Page 217: Roadside Emergencies

    Roadside Emergencies ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty.
  • Page 218: Hazard Warning Flashers

    U.S. Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest dealership within 35 miles (56 kilometers). To obtain reimbursement information, U.S.
  • Page 219: Fuel Cut-Off Switch

    WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision. In the event of a moderate to severe collision, this vehicle is equipped with a fuel pump shut-off feature that stops the flow of fuel to the engine.
  • Page 220 Roadside Emergencies Preparing Your Vehicle Note: Use only a 12–volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’s electrical system. 1. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch.
  • Page 221 Roadside Emergencies 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery.
  • Page 222 Roadside Emergencies Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
  • Page 223: Customer Assistance

    A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
  • Page 224 • The name of the authorized dealer and city where located • The vehicle’s current odometer reading. In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
  • Page 225 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126...
  • Page 226 BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
  • Page 227 (CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
  • Page 228 Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY FORD EXPORT OPERATIONS & GLOBAL INITIATIVES Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A.
  • Page 229 If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.com. If you are in another foreign country, contact the nearest authorized dealer.
  • Page 230: Reporting Safety Defects (U.s. Only)

    However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153);...
  • Page 231: Fuses

    Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicle are not working, a fuse may have blown.
  • Page 232: Fuse Specification Chart

    Fuses FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power distribution box is located in the engine compartment.
  • Page 233 Fuses Fuse or relay Fuse amp Protected components number rating — Not used 30A* Blower motor relay 20A* Power point (body) 40A* Rear defroster relay 40A* Cooling fan relay 40A* Anti-lock brake system pump 30A* Wipers 30A* Anti-lock brake system valve —...
  • Page 234 Fuses Fuse or relay Fuse amp Protected components number rating 30A* Passenger front window — Not used 30A* Passenger power seat 30A* Driver power seat 30A* Front amplifier (Shaker radio) 30A* Driver front window motor 40A* Convertible top motor Diode Fuel diode —...
  • Page 235 Fuses Fuse or relay Fuse amp Protected components number rating 15A** Powertrain control module vehicle power 1 15A** Powertrain control module vehicle power 5 15A** Powertrain control module vehicle power 2 – emissions related powertrain components Full ISO relay Cooling fan relay (high) Full ISO relay Blower motor relay Full ISO relay...
  • Page 236 Fuses Passenger Compartment Fuse Panel The fuse panel is located in the lower passenger side area behind the kick panel. Open the trim panel door and remove the fuse cover to access the fuses. Use the provided fuse puller tool to remove a fuse. It is located inside the fuse cover.
  • Page 237 Fuses Fuse or relay Fuse amp Protected components number rating Turn signals, Hazard flashers Left low beam headlamp Right low beam headlamp Courtesy lamps Switch illumination, Pony projection lights Security module 7.5A Power mirrors Not used (spare) Center information display, Electronic finish panel, Global position system Climate control...
  • Page 238 Fuses Fuse or relay Fuse amp Protected components number rating Reverse parking aid (non-Shelby), Vehicle dynamics control module (Shelby only) Not used (spare) Electronic stability control Auxiliary body module run/start Anti-theft system Rear defroster relay coil Not used (spare) Radio/Navigation Not used (spare) Accessory delay (windows, automatic dimming rear view...
  • Page 239: Maintenance

    GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
  • Page 240: Opening And Closing The Hood

    Maintenance Working with the Engine On WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. Set the parking brake and shift to positionP. 2.
  • Page 241: Under Hood Overview

    Maintenance UNDER HOOD OVERVIEW 3.7L V6 Engine A. Battery B. Engine oil dipstick C. Engine oil filler cap D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 242 Maintenance 5.0L V8 Engine A. Battery B. Engine oil filler cap C. Engine oil dipstick D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 243: Engine Oil Dipstick

    Maintenance Engine Shield Some vehicles may be equipped with an aero-shield under the engine. Remove the front fasteners of the shield to gain access for service. This includes oil and filter changes. ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine.
  • Page 244: Engine Coolant Check

    Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
  • Page 245 Maintenance Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hot engine parts.
  • Page 246 Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. • A coolant concentration of 60% will provide improved freeze point protection.
  • Page 247 Maintenance Vehicles driven year-round in non-extreme climates should use prediluted engine coolant for optimum cooling system and engine protection. What You Should Know About Fail-Safe Cooling If the engine coolant supply is depleted, this feature allows the vehicle to be driven temporarily before incremental component damage is incurred. The fail-safe distance depends on ambient temperatures, vehicle load and terrain.
  • Page 248 Maintenance When Fail-Safe Mode is Activated You have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1.
  • Page 249: Automatic Transmission Fluid Check

    4. Add enough fluid through the filler opening to bring the fluid up to the recommended levels. 5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. 2014 05+ Mustang (197)
  • Page 250: Brake Fluid Check

    Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive.
  • Page 251: Battery

    Maintenance CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
  • Page 252 Maintenance Battery Relearn Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance.
  • Page 253: Checking The Wiper Blades

    Maintenance CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1.
  • Page 254: Adjusting The Headlamps

    Maintenance See Scheduled Maintenance Information for the appropriate intervals for changing the air filter element. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used.
  • Page 255 Maintenance Vertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away. • (1) 8 ft (2.4 m) • (2) Center height of lamp to ground •...
  • Page 256: Changing A Bulb

    Maintenance 5. Then use a 7 mm Allen wrench or a Phillips screwdriver to adjust the vertical aim of the headlamp. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE. 6. Close the hood and turn off the lamps. CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure.
  • Page 257 Maintenance 4. Rotate the socket counterclockwise and remove from the lamp assembly. 5. Carefully pull the bulb straight out of socket. Install the new bulb in reverse order. Replacing Front Sidemarker Bulb 1. Make sure the headlamp control is in the off position. 2.
  • Page 258 Maintenance Replacing Fog Lamp Bulbs (V6) (if equipped) 1. Make sure the headlamp control is in the off position and open the hood. 2. Remove the hex head screws attaching the underbody forward aeroshield. 3. Remove the underbody forward aeroshield to gain access to the fog lamp assembly.
  • Page 259 Maintenance Replacing Rear Sidemarker Lamp Bulbs 1. Make sure the headlamp switch is in the off position and locate the sidemarker on the rear bumper fascia. 2. Insert a flathead screwdriver between the rear of the sidemarker lens and the bumper fascia. 3.
  • Page 260 Maintenance BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized D.O.T. for North America and an E for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
  • Page 261: Vehicle Care

    Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft® Bug and Tar Remover (ZC-42) Motorcraft®...
  • Page 262 Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft® Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface;...
  • Page 263: Waxing

    Vehicle Care Convertible Top and Padded Molding For vinyl tops, wash with Motorcraft® Detail Wash. For cloth tops, wash with a high quality convertible top cleaner and protectant. • Do not use stiff bristle brushes or abrasive materials or cleaners. •...
  • Page 264: Cleaning The Windows And Wiper Blades

    Vehicle Care • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage. • Never wash or rinse any ignition coil, spark plug wire or spark plug well, or the area in and around these locations. •...
  • Page 265: Cleaning The Interior

    Vehicle Care CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a crash.
  • Page 266: Cleaning Leather Seats

    Vehicle Care • Be certain to wash or wipe your hands clean if you have been in contact with certain products, such as insect repellent and suntan lotion, in order to avoid possible damage to the interior painted surfaces. • Do not use household or glass cleaners as these may damage the finish of the instrument panel, interior trim and cluster lens.
  • Page 267: Cleaning The Alloy Wheels

    Vehicle Care CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. Aluminum wheels and wheel covers are coated with a clearcoat paint finish. In order to maintain their shine: • Clean weekly with Motorcraft® Wheel and Tire Cleaner. Heavy dirt and brake dust accumulation may require agitation with a sponge.
  • Page 268 Vehicle Care • Cover chrome and stainless steel parts with a thick coat of auto wax to prevent discoloration. Re-wax as necessary when the vehicle is washed. • Lubricate hood latch, all door latches and trunk lid hinges with a light grade oil.
  • Page 269 Vehicle Care Brakes • Make sure brakes and parking brake are fully released. Tires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are covered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricate working parts and prevent corrosion.
  • Page 270: Wheels And Tires

    10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
  • Page 271 Wheels and Tires Temperature A B C WARNING: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory...
  • Page 272 Wheels and Tires • Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position) or Tire Label located on the B-Pillar or the edge of the driver’s door.
  • Page 273 Wheels and Tires Note: If your tire size does not begin with a letter, this may mean it is designated by either ETRTO (European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association). B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
  • Page 274 Wheels and Tires Letter rating Speed rating - mph (km/h) 168 mph (270 km/h) 186 mph (299 km/h) Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR. For those with a maximum speed capability over 186 mph (299 km/h), tire manufacturers always use the letters ZR.
  • Page 275 Wheels and Tires • Temperature: The temperature grades are A (the highest), B and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. M.
  • Page 276 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
  • Page 277 Always inflate your tires to the Ford recommended inflation pressure even if it is less than the maximum inflation pressure information found on the tire. The Ford recommended tire inflation pressure is found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located...
  • Page 278 Wheels and Tires Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located...
  • Page 279 Wheels and Tires Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section.
  • Page 280 Wheels and Tires Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended.
  • Page 281 (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or the Tire Label...
  • Page 282 The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
  • Page 283 Wheels and Tires Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds.
  • Page 284 Summer tires do not have the Mud and Snow (M+S or M/S) tire traction rating on the tire side wall. Since summer tires do not have the same traction performance as All-season or Snow tires, Ford does not recommend using summer tires when temperatures drop to approximately 40°F (5°C) or below (depending on tire wear and...
  • Page 285 WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
  • Page 286: Tire Pressure Monitoring System (Tpms)

    Wheels and Tires TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Your Tires in this chapter. Failure to properly maintain your tire pressure could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
  • Page 287 Wheels and Tires When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
  • Page 288 Wheels and Tires To restore the full function of the tire pressure monitoring system, have the damaged road wheel and tire assembly repaired and remounted on your vehicle. For additional information, see Changing Tires with a Tire Pressure Monitoring System in this section. When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air.
  • Page 289 Wheels and Tires Low tire Possible cause Customer action required pressure warning light Flashing Spare tire in use Repair the damaged road wheel warning light and tire and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Your Temporary Spare Tire is Installed in this section.
  • Page 290: Changing A Road Wheel

    Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
  • Page 291 Wheels and Tires A dissimilar spare tire and wheel assembly is defined as a spare tire or wheel that is different in brand, size or appearance from the road tires and wheels and can be one of three types: 1. T-type mini-spare: This spare tire begins with the letter T for tire size and may have Temporary Use Only molded in the sidewall.
  • Page 292 Wheels and Tires The usage of a full-size dissimilar spare tire and wheel assembly can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability •...
  • Page 293 Wheels and Tires WARNING: Never get underneath a vehicle that is supported only by a jack. If the vehicle slips off the jack, you or someone else could be seriously injured. WARNING: Do not attempt to change a tire on the side of the vehicle close to moving traffic.
  • Page 294 Wheels and Tires 4. Remove the lug wrench, spare tire and jack. 5. Remove the center ornament from the wheel. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 6.
  • Page 295 Wheels and Tires 7. Put the jack in the jack notch next to the tire you are changing. Turn the jack handle clockwise until the wheel is completely off the ground. 8. Remove the lug nuts with the lug wrench. 9.
  • Page 296: Temporary Mobility Kit

    TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additional replacement sealant canisters. The kit is located in the spare tire well in the trunk. The kit consists of...
  • Page 297 Wheels and Tires General Information WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. Note: Do not use the temporary mobility kit if a tire has become severely damaged by driving the vehicle with a tire that has insufficient air pressure.
  • Page 298 Always store the kit in its original location. • After sealant use, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. • When inflating a tire or other objects, use the black air hose only. Do not use the transparent hose which is designed for sealant application only.
  • Page 299 Wheels and Tires First Stage: Reinflating the Tire with Sealing Compound and Air WARNING: Do not stand directly over the temporary mobility kit while inflating the tire. If you notice any unusual bulges or deformations in the tire’s sidewall during inflation, stop and call roadside assistance.
  • Page 300 Wheels and Tires 7. Push and turn dial (A) counterclockwise to the sealant position. Turn on the kit by pressing the on button (B). 8. Inflate the tire to the pressure listed on the Tire Label located on the driver’s door or the door jamb area.
  • Page 301 Wheels and Tires Second Stage: Checking Tire Pressure WARNING: If you are proceeding from the First Stage: Reinflating the Tire with Sealing Compound and Air section and have injected sealant in the tire and the pressure is below 20 psi (1.4 bar), stop and call roadside assistance.
  • Page 302 Note: After sealant use, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. You can check the tire pressure anytime within the 120 miles (200 kilometers) by performing the procedure from Second Stage: Checking Tire Pressure listed previously.
  • Page 303 Wheels and Tires 3. Using the yellow cap tool, press the tab located on the temporary mobility kit compressor housing while pulling up on the sealant canister. Installation of the sealant canister to the temporary mobility kit: 1. Align the sealant canister with the temporary mobility kit housing.
  • Page 304 3. Wrap the clear tube around the compressor housing. Note: If you experience any difficulties with the removal or installation of the sealant canister, consult your Ford Motor Company authorized dealer for assistance. Be sure to check the sealant compound’s use-by date regularly.
  • Page 305: Technical Specifications

    N•m ⁄ x 20 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Note: Inspect the wheel pilot hole and mounting surface prior to installation. Remove any visible corrosion or loose particles.
  • Page 306: Capacities And Specifications

    Capacities and Specifications ENGINE SPECIFICATIONS Engine 3.7L V6 Engine 5.0L V8 Engine Cubic inches Required fuel Minimum 87 octane Minimum 87 octane Firing order 1-4-2-5-3-6 1-5-4-8-6-3-7-2 Ignition system Coil on plug Coil on plug Spark plug gap 0.049–0.053 in 0.049–0.053 in (1.25-1.35 mm) (1.25–1.35 mm) Compression ratio...
  • Page 307 Capacities and Specifications 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 308 Capacities and Specifications 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 309 Capacities and Specifications 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 310 Capacities and Specifications 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 311: Part Numbers

    For spark plug replacement, see your authorized dealer. See Scheduled Maintenance Information for the appropriate intervals for changing the spark plugs. Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft® or equivalent replacement parts. The customer warranty may be void for any damage to the engine if such spark plugs are not used.
  • Page 312: Vehicle Certification Label

    Capacities and Specifications The Vehicle Identification Number (VIN) contains the following information: A. World manufacturer identifier B. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E.
  • Page 313: Transmission Code Designation

    Capacities and Specifications TRANSMISSION CODE DESIGNATION You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. Description Code Six-speed manual transmission (MT82) Six-speed automatic transmission (6R80) 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 314: Accessories

    Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through your local Ford or Ford of Canada dealer. Ford Motor Company will repair or replace any properly dealer-installed Ford Custom Accessories found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
  • Page 315 Ford Motor Company engineering requirements. Contact your Ford dealer for details regarding the manufacturer’s limited warranty and/or a copy of the FLA product limited warranty offered by the accessory manufacturer.
  • Page 316: Ford Extended Service Plan

    BaseCare – Covers 84 components. PowertrainCare – Covers 29 critical components. Ford ESP is honored by all Ford and Lincoln Dealers in the U.S. and Canada. It is the only extended service plan authorized and backed by Ford Motor Company. That means you get: •...
  • Page 317 Protect Yourself from the Rising Cost of Vehicle Repairs with a Ford Extended Service Plan To learn more, call our Ford ESP specialists at 800–367–3377, and do not forget to ask about our interest free payment program, allowing you all the security and benefits Ford ESP has to offer while paying over time.
  • Page 318 This information is subject to change. For more information, visit your local Ford of Canada dealer or www.ford.ca to find the Ford Extended Service Plan that is right for you. 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012...
  • Page 319: Scheduled Maintenance

    Motor Company’s specifications. Parts installed at your dealership carry a nationwide, 12 month/12000 mile (20000 kilometer) parts and labor limited warranty. If you do not use Ford authorized parts, they may not meet Ford specifications and, depending on the part, it could affect emissions compliance.
  • Page 320 Ford Motor Company parts in performance and durability. It is the owner’s responsibility to determine the equivalency of such parts. Please consult your Warranty Guide for complete warranty information.
  • Page 321 Ford Motor Company recommended additives and chemicals are listed in the owner manual and in the Ford Workshop Manual. Additional chemicals or additives not approved by Ford are not recommended as part of normal maintenance. Please consult your warranty information.
  • Page 322 In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
  • Page 323 Scheduled Maintenance 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)
  • Page 324: Normal Scheduled Maintenance And Log

    Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® – 3.7L and 5.0L Engines Your vehicle is equipped with an Intelligent Oil-Life Monitor® that determines when the engine oil needs to be changed based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduce environmental waste at the same time.
  • Page 325 Scheduled Maintenance Normal Scheduled Maintenance At every oil change Change engine oil and filter. interval as indicated by Rotate tires, inspect tire wear and measure the information display tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level. Consult dealer for requirements. Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
  • Page 326 Scheduled Maintenance Additional Maintenance Items Every 20000 miles Replace cabin air filter (if equipped). (32000 km) Every 30000 miles Replace engine air filter. (48000 km) At 100000 miles Change engine coolant. (160000 km) Every 100000 miles Replace spark plugs. (160000 km) Inspect accessory drive belt(s).
  • Page 327 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
  • Page 328 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 329 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 330 Scheduled Maintenance SPECIAL OPERATING CONDITIONS – 3.7L AND 5.0L ENGINES If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance.
  • Page 331 Scheduled Maintenance Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads Inspect frequently, Replace cabin air filter (if equipped). service as required Replace engine air filter. Every 5,000 miles Inspect the wheels and related components for (8,000 km) abnormal noise, wear, looseness or drag.
  • Page 332 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
  • Page 333 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 334 Police/Taxi/Livery vehicle axle maintenance: Change rear axle fluid every 100000 miles (160000 km). Rear axle fluid change may be waived if the axle was filled with 75W140 synthetic gear fluid meeting Ford specification WSL-M2C192-A, part number FITZ-19580-B or equivalent. Add four ounces (118 mL) of additive friction modifier XL-3 (EST-M2C118-A) or equivalent for complete refill of Traction-Lok rear axles.
  • Page 335: Engine Coolant Change Log

    Scheduled Maintenance ENGINE COOLANT CHANGE RECORD 3.7L and 5.0L Engines Initial change Six years or 100000 miles (160000 km) (whichever comes first) After initial change Every three years or 50000 miles (80000 km) Shelby GT500 owners: See the Shelby GT500 supplement. Engine Coolant Change Log EALER ALIDATION...
  • Page 336: Sync

    SYNC® SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist®, Vehicle Health Report and SYNC Services (Traffic, Directions &...
  • Page 337 SYNC® GENERAL INFORMATION Make sure you review your device’s manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-8:00pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–565–3673 Times are subject to change due to holidays.
  • Page 338 Safety Information WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 339 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority.
  • Page 340 SYNC® Say: If you want to: “Services” Access the SYNC Services portal. “Mobile apps” Access mobile applications. “Help” Hear a list of voice commands available in the current mode. If equipped, U.S. only. System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings).
  • Page 341 SYNC® For example, “Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home.” Or, “Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe.”...
  • Page 342: Pairing Your Phone For The First Time

    SYNC® Pairing a Phone for the First Time Note: Make sure the vehicle ignition and radio are turned on and the transmission is in position P (automatic transmission) or 1 (manual transmission). Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls.
  • Page 343 SYNC® Phone Voice Commands Press the voice button and say any of the following: “PHONE” “Call <name>” “Call <name> at home” “Call <name> at work” OR “Call <name> in office” “Call <name> on other” “Call <name> on mobile OR cell” “Dial”...
  • Page 344 SYNC® At any time, you can say the following global commands: GLOBAL COMMANDS “Exit” “Help” “Phone” “Services” “Vehicle Health Report” “Voice settings” If equipped, U.S. only. Making Calls Using the Touchscreen Press the PHONE hard button, then choose between three ways to make a call: 1.
  • Page 345 SYNC® Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone button. • Reject the call by pressing and holding the phone button. • Ignore the call by doing nothing. Phone Options during an Active Call During an active call, you have additional menu features which become available such as putting a call on hold, joining calls, etc.
  • Page 346 SYNC® Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your call history and phone book and send text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist™, Vehicle Health Report and SYNC Apps.
  • Page 347 SYNC® Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature.
  • Page 348 2. Scroll to cycle through the message options in the following chart. 3. Select the desired text message. Each text message is sent with the following signature: “This message was sent from my <Ford or Lincoln>”. 4. Press Recipients, then choose who to send it to using the Phone Book or Phone Number.
  • Page 349 SYNC® Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download. 1. Press the phone button. 2.
  • Page 350 SYNC® When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e., add, delete, download). Press OK to select and scroll between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone.
  • Page 351 SYNC® System Settings System Settings provide access to your Bluetooth Devices and Advanced menu features. The Bluetooth Devices menu allows you to add, connect, delete and set a phone as primary as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.
  • Page 352 SYNC® If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates all Bluetooth features.
  • Page 353: 911 Assist

    SYNC® SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, U.S. only): Provides access to traffic, directions and information such as travel, horoscopes, stock prices and more.
  • Page 354 SYNC® Note: If 911 Assist is turned on or off by any user, that setting applies for all paired phones. If 911 Assist is turned off, a voice message plays and/or a display message/icon comes on when the vehicle is started after a previously paired phone connects.
  • Page 355 SYNC® • A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength. • The vehicle must have battery power and be located in the U.S., Canada or in a territory in which 911 is the emergency number. In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would activate 911 Assist);...
  • Page 356: Vehicle Health Report

    SYNC® Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems that are electronically monitored by the vehicle and will not monitor or report the status of any other system, (i.e., brake lining wear).
  • Page 357 Vehicle Health Report Privacy Notice When you run a Vehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to Vehicle Health Report may also collect additional vehicle information.
  • Page 358 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect the vehicle travel information or other information identified in the Terms and Conditions, do not activate or use the service.
  • Page 359 SYNC® Connecting to SYNC Services Using Voice Commands 1. Press the voice button. 2. When prompted, say “Services”. This initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabled cellular phone. 3. Once you are connected to the service, follow the voice prompts to request the desired service, such as “Traffic”...
  • Page 360 SYNC® 2. Follow the voice prompts to select your destination. Once your destination is selected, your current vehicle location is uploaded and a route based on current traffic conditions is calculated and sent back to your vehicle. After the route download is complete, the phone call is automatically ended.
  • Page 361 SYNC® SYNC Services Quick Tips Portable Your subscription is associated with your Bluetooth-enabled cellular phone number, not your VIN (Vehicle Identification Number). You can pair and connect your phone to any vehicle equipped with Traffic, Directions and Information and continue enjoying your personalized services.
  • Page 362 SYNC® To Access Using the Media Menu 1. Press the AUX button to access the SYNC menu. 2. Press the Menu button to access the SYNC Media menu. 3. Browse to Mobile Applications and press OK. 4. Browse to your desired app and press OK. 5.
  • Page 363 SYNC® Connecting Your Digital Media Player to the USB Port Note: If your digital media player has a power switch, make sure that the device is turned on. To connect using voice commands: 1. Plug the device into the vehicle’s USB port. 2.
  • Page 364 SYNC® What’s Playing? At any time when a track is playing, you can press the voice icon and ask the system, “What’s playing?”. The system reads the metadata tags (if populated) of the playing track to you. Media Voice Commands Press the voice icon and, when prompted, say “User Device”...
  • Page 365 SYNC® Supported Media Players, Formats and Metadata Information SYNC® is capable of hosting nearly any digital media player, including iPod®, Zune™, Plays from device players, and most USB drives. Supported audio formats include MP3, WMA, WAV and AAC. You are also able to organize your indexed media from your playing device by metadata tags.
  • Page 366 SYNC® Accessing the Media Music Library This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on.
  • Page 367 SYNC® When you select: You can: Access your playlists (from formats, such as Playlists ASX, .M3U, .WPL, .MTP.). The system lists your playlists alphabetically in flat file mode. If there are more than 255, they are organized into alphabetical categories. Search for and play a specific track which Tracks has been indexed.
  • Page 368 SYNC® System Settings System settings provide access to your Bluetooth devices and Advanced menu features. The Bluetooth menu allows you to add, connect and delete a device as well as turn the Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults and perform a master reset.
  • Page 369 SYNC® Phone Issues Issue Possible Possible Solution(s) Cause(s) Excessive The audio control Review your phone’s user guide background noise settings on your regarding audio adjustments. during a phone phone may be call. affecting SYNC performance. During a call, I Possible phone Try turning off the device, can hear the malfunction.
  • Page 370 SYNC® Phone Issues Issue Possible Possible Solution(s) Cause(s) • This is a • Go to the website to review I am having trouble phone-dependent your phone’s compatibility. • Try turning off the device, connecting my feature, OR • Possible phone phone to SYNC.
  • Page 371 SYNC® USB/Media Issues Issue Possible Possible Solution(s) Cause(s) • Try turning off the device, I am having Possible device trouble malfunction. resetting the device or removing connecting my the device’s battery, then trying device. again. • Make sure you are using the manufacturer’s cable.
  • Page 372 SYNC® USB/Media Issues Issue Possible Possible Solution(s) Cause(s) • This is a Bluetooth audio Make sure the device is does not stream. phone-dependent connected to SYNC and that you feature, OR have pressed play on your • The device is device.
  • Page 373 SYNC® Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Possible Solution(s) Cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be must first register online to use Health Report is activated on the •...
  • Page 374 SYNC® Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Possible Solution(s) Cause(s) • This could be • Update your mobile number I am unable to submit a report. due to your in your account on the website. • Make sure you have full signal phone’s compatibility, OR strength and that your...
  • Page 375 SYNC® Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
  • Page 376 SYNC® Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section. •...
  • Page 377 SYNC® AppLink Issues Issue Possible Possible Solution(s) Cause(s) • Your device • Check the website for SYNC does not find any mobile may not support compatible devices and apps that are on the AppLink applications. • Make sure your device is my phone.
  • Page 378: Navigation System (If Equipped)

    Navigation System (If Equipped) NAVIGATION CONTROLS Type 1 WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
  • Page 379 Navigation System (If Equipped) E. TUNE RPT: • In radio or satellite radio mode, turn the control to advance in individual increments up or down the frequency band to the desired station. • In MP3 mode, turn the control to advance to the next or previous folder.
  • Page 380 Navigation System (If Equipped) M. MENU: • Press this button to access the system menu. • Press while the system menu is active to access the menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode. N. MAP: •...
  • Page 381 Navigation System (If Equipped) Type 2 WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
  • Page 382 Navigation System (If Equipped) A. Memory presets: • Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. • In radio and satellite radio mode, press a button to access your saved presets or channels.
  • Page 383 Navigation System (If Equipped) L. MENU: • Press this button to access the system menu. • Press while the system menu is active to access the menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode. M. SOUND: •...
  • Page 384: Status Bars

    Navigation System (If Equipped) Display mode voice commands “Night” “Auto” “Help” STATUS BARS The top status bar shows the current mode, exterior temperature, time and display icons if you have enabled Bluetooth or other options. The bottom status bar shows the Home icon and may also show the current driver and passenger selected temperatures, fan speed and air flow direction, the current...
  • Page 385: Loading Pictures

    Navigation System (If Equipped) Loading Photos Note: The system is not compatible with discs written in Packet Write mode. Your system allows you to upload and view up to 32 photos. Only the photograph(s), which meets the following conditions, display: •...
  • Page 386: Voice Recognition

    Navigation System (If Equipped) Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. To get the best performance from the touch-sensitive controls: • Make sure your hands are clean and dry. •...
  • Page 387 Navigation System (If Equipped) How To Use Voice Commands with Your System Press the voice icon; after the tone, speak your command clearly. You can say these commands at any time. “Audio” “Navigation” “CD” “Radio” “Climate” “SYNC” “Disc” “Tutorial” “Display mode” “User profile”...
  • Page 388 Navigation System (If Equipped) Voice Settings Voice settings allow you to customize the level of system interaction, help and feedback. The system defaults to standard interaction, which uses candidate lists, and confirmation prompts as these provide the highest level of guidance and feedback. Interaction Mode: Novice mode provides detailed interaction and guidance while the advanced mode has less audible interaction and more tone prompts.
  • Page 389 Navigation System (If Equipped) If you select: You can: Clock Display Clock allows you to turn the clock on or off. Note: If your vehicle is equipped with an in-dash analog clock, you can set the time on this screen, but it may not appear in the status bar for viewing purposes.
  • Page 390 Navigation System (If Equipped) If you select: You can: Feedback Touch Screen Button Beep allows you to select when the system sounds an audible tone: All Buttons (whenever any system button is touched), Touch Screen (only when touchscreen selections are made) or Off (no audible tones at all).
  • Page 391 Navigation System (If Equipped) If you select: You can: System Settings Language allows you to choose between English, Spanish and French. Units allows you to choose between English and Metric measurements. Keyboard Layout allows you to choose between an ABC or QWERTY keyboard. Delete Stored Items allows you to choose to delete all of the entries from Address Book, Previous Destinations, Avoid Areas, Saved...
  • Page 392: Accessing Media Features

    Navigation System (If Equipped) ENTERTAINMENT Your system offers many media options. You can access these options using the touchscreen or voice commands. AM/FM Radio Press the RADIO hard button. To change between AM, FM1 and FM2, touch the AM or FM tab.
  • Page 393 Navigation System (If Equipped) When you select: You can: Show Presets View the preset stations. Save a station by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the station. Sound returns when finished.
  • Page 394 Navigation System (If Equipped) If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
  • Page 395 Navigation System (If Equipped) HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives.
  • Page 396 Navigation System (If Equipped) When you select: You can: Tune Go up and down the frequency in individual increments. If the current station has multiple digital broadcasts, the multicast indicator appears. Press Tune repeatedly to advance through all available broadcasts. If you are on the last broadcast channel, press to advance to the next frequency on the band.
  • Page 397 Navigation System (If Equipped) When you select: You can: To save a multicast When the channel is active on-screen, press station as a preset and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station.
  • Page 398 Navigation System (If Equipped) In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.
  • Page 399 HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
  • Page 400 Navigation System (If Equipped) SIRIUS® Satellite Radio (If Activated) Press the RADIO hard button, then select SAT on the touchscreen. When you select: You can: SAT123 Press this button to access three different satellite radio modes (SAT1, SAT2 or SAT3). Scan Press this button to hear a brief sampling of all satellite radio channels within the current...
  • Page 401 Titles that you would like the system to alert you to when they are playing on other channels. Note: SIRIUS® does not support the Alert feature on all channels. Ford Motor Company shall not be responsible for Alert feature variation. Show Presets Display presets at the bottom of the screen.
  • Page 402 Navigation System (If Equipped) SIRIUS® Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
  • Page 403 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
  • Page 404 Navigation System (If Equipped) Potential reception issues Station overload When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Satellite radio signal Your display may show ACQUIRING... to interference indicate the interference and the audio system may mute.
  • Page 405 Navigation System (If Equipped) Troubleshooting tips Radio Display Condition Possible Action Updating. Update of channel No action required. programming in The process may take progress. up to three minutes. Call SIRIUS Your satellite service is Contact SIRIUS at 1–888–539–7474. no longer available. 1-888-539-7474 to resolve subscription issues.
  • Page 406 Navigation System (If Equipped) CD Voice Commands If you are listening to a CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a CD, press the voice button and, after the tone, say “CD”, then any of the commands in the following chart.
  • Page 407 Navigation System (If Equipped) Note: Your system only plays NTSC formatted discs. The system does not support PAL format. Your system allows you to play DVD audio and video discs. Make sure your vehicle is in position P (vehicles equipped with an automatic transmission) or the parking brake is engaged (vehicles equipped with a manual transmission).
  • Page 408 Navigation System (If Equipped) During disc play, you can also touch the screen to access the virtual remote, which allows you to Move Controls on the screen, as well as use the cursor controls, Enter and Return to navigate and select within the menus.
  • Page 409 Navigation System (If Equipped) DVD Voice Commands If you are watching a DVD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not watching a DVD, press the voice button and, after the tone, say “DVD”, then any of the commands in the following chart.
  • Page 410: Jukebox Features

    Navigation System (If Equipped) Jukebox Your system has a Jukebox feature, which allows you to save desired tracks or CDs to the hard drive for later access. The hard drive can store up to 10 GB* (164 hours; approximately 2472 tracks) of music. The system contains a Gracenote®...
  • Page 411 Navigation System (If Equipped) When you select: You can: Music library Access all of your saved music. You can choose to view or play the material in the following ways: Play All Tracks allows you to play all tracks saved in the jukebox. Playlist allows you to play your own playlist.
  • Page 412: Creating A Playlist

    Navigation System (If Equipped) Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on the touchscreen. 1. Select Options. 2. Select Edit Playlists, then which playlist you would like to create. 3. Select which category you would like to access from your saved music. 4.
  • Page 413 Navigation System (If Equipped) User Device If your vehicle is equipped with SYNC®, there is a User Device tab. For more information, see the SYNC® chapter. Line In (Auxiliary Input Jack) Your vehicle is equipped with an audio input jack, which allows you to plug a portable audio device into your vehicle’s audio system.
  • Page 414 Navigation System (If Equipped) Climate Control Features Fan speed Touch + or – to increase or decrease fan speed. Passenger Touch the arrows to increase or decrease the temperature temperature. Dual Touch to turn on the passenger temperature control. MAX A/C Touch to cool your vehicle with recirculated air.
  • Page 415: Where Am I

    Navigation System (If Equipped) INFORMATION Under the Information menu, you can access features such as Where Am I? and SIRIUS® Travel Link™, view your calendar, see system information and get basic system help. Press the I (Information) hard button to access these features. Where Am I? Press the I button and select the Where Am I? tab.
  • Page 416 Navigation System (If Equipped) Press the I (information) button, then select Sirius Travel Link. Choose from any of the following services: When you select: You can: Traffic On Route Identify traffic incidents on your route, nearby your vehicle’s current location or near any of Traffic Nearby your favorite places (if programmed).
  • Page 417 Navigation System (If Equipped) “TRAVEL LINK” “Fuel prices” “Sports scores” “Golf leaders” “Traffic” “Golf schedule” “Travel link help” “Motor sports order” “Weather” “Motor sports schedule” “Weather map” “Movie listings” If you have said, “Sports schedule”, you may say any of the commands in the “Sports schedule”...
  • Page 418: Accessing The Help Screen

    Navigation System (If Equipped) System Information Press the I (information) button, then select System Information. In this screen, you can view the following options: • Phone number for your Customer Service Center • Current system versions installed • Current SIRIUS® Radio ESN •...
  • Page 419: Navigation Features

    Navigation System (If Equipped) SOUND The sound menu allows you to access and adjust settings, such as Bass, Treble, Fade, Balance, Speed Compensated Volume (SCV) and the visualizer. Press the SOUND hard button. When you select: You can: Increase or decrease levels by pressing + or -. Bass/Treble Balance/Fade Adjust the sound between the left and right...
  • Page 420 Navigation System (If Equipped) Route Guidance in Incompletely Mapped Areas There are some rural areas in the map database without fully verified roads. When the system is in route guidance mode, and the navigation system encounters these incompletely mapped areas, the system alerts you by: •...
  • Page 421 Navigation System (If Equipped) Quick Note: Items on this screen are selectable at any speed. Find Nearest POI Select up to five different points of interest (POI) favorites that you can search for while your vehicle is moving. You can change these categories at any time but the default categories are: •...
  • Page 422 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Address Book You can store up to 25 entries, which you can use as destinations, waypoints and areas to avoid.
  • Page 423 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Touch this button to program a street address Street Address as a destination or waypoint. •...
  • Page 424 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Point of Interest Touch this button to select a point of interest (POI) on the map as a destination or waypoint. There are three ways to search for a point of interest: 1.
  • Page 425 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Touch this button to select an entrance and Freeway Entrance/Exit exit point to a freeway you select. You can sort the entrance and exit point alphabetically or in order of distance from your vehicle’s position.
  • Page 426 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Intersection Touch this button to select an intersection point. Enter the name of the first street, then the first letter of the second street.
  • Page 427 Navigation System (If Equipped) To delete all stored Address Book and Previous Destination entries at once: 1. Press the MENU hard button. 2. Select the System Settings tab. 3. Press the View button for Delete Stored Items. 4. Select Address Book or Previous Destinations. Edit Route Touch this button to cancel the current route.
  • Page 428 Navigation System (If Equipped) Programming a Destination Using Voice Commands Press the voice button on the steering wheel. If you want to: Say: Enter an address. “Destination street address” Enter an intersection. “Destination intersection” Find a point of interest “Destination nearest <POI category>” or (POI) by its category.
  • Page 429 Navigation System (If Equipped) Route Selection Screen Icons Icons, located above the route selection choices, represent features on the routes. A. Freeways B. Toll Roads C. Ferries D. High-occupancy Vehicle Lanes E. Time-restricted Roads F. Avoid Area Selection If you select the fastest route, and the freeways icon is illuminated, this means that the route uses freeways.
  • Page 430 Navigation System (If Equipped) Within these main categories, there are subcategories, which contain more listings: Subcategories Restaurant Auto Dealership Parking Public Transit Home & Garden Education Personal Care Services Setting Your Navigation Preferences Select settings for the system to take into account when planning your route.
  • Page 431 Navigation System (If Equipped) Map Preferences Bird’s Eye View ON provides an elevated map perspective. OFF turns the feature off. Adjust Angle offers six different map angles. Turn List Format Top-to-Bottom starts the turn instructions from the top. Bottom-to-Top starts the turn instructions from the bottom.
  • Page 432 Navigation System (If Equipped) Traffic Preferences Traffic Icons to Touch this button to display a list of map overlay on Map icons that you can turn off and on. The list of icons includes: • Weather related incidents • Road work •...
  • Page 433 Navigation System (If Equipped) Navigation Preferences Avg. Speed: When this feature is on, the system displays Residential the average speed on a residential road, initially set to 25 mph (40 km/h). You can change the setting for your driving preferences. This setting helps estimate your arrival time at a destination based on your driving preferences.
  • Page 434 Navigation System (If Equipped) Navigation Preferences Calibrate Position allows you to adjust the direction of your vehicle by pressing the arrow buttons on the screen. Distance allows you to recalibrate the distance to the destination while your vehicle is moving. Restore Default Touch the Reset button to return the settings Settings...
  • Page 435 Navigation System (If Equipped) North Up always shows the northern direction to be upward on the screen. Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scroll mode.
  • Page 436 Navigation System (If Equipped) No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may display under normal operation in an area with poor GPS access. Map Scale The map display scale has 17 levels, ranging from 0.02 miles (.03 kilometers) to 1000 miles (1600 kilometers).
  • Page 437 Annual navigation map updates are available for purchase through your dealership, by calling 1-800-NAVMAPS (in Mexico, call 01–800–557–5539) or going to www.navigation.com/ford. You need to specify the make and model of your vehicle to determine if there is an update available.
  • Page 438 Navigation System (If Equipped) Navigation Voice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say “Navigation”, then any of the following commands: “NAVIGATION” “Cancel next waypoint” “Show destination” “Cancel route” “Show heading up” “Destination”...
  • Page 439 Navigation System (If Equipped) “DESTINATION” “Street address” “Help” Troubleshooting Symptoms Possible Cause Action Focus error. The system is not able Contact your to play a reproduced authorized dealer. disc. Bad disc. You inserted the disc The system upside down or the automatically ejects system is unable to the disc.
  • Page 440 Navigation System (If Equipped) Symptoms Possible Cause Action A pop-up window There is a system Contact your displays “Navigation hardware or software authorized dealer. fault. A system fault error. has been detected that may cause the navigation to perform abnormally. Please contact your dealership.”...
  • Page 441: Appendices

    SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“MS SOFTWARE”) are protected by international...
  • Page 442 Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
  • Page 443 • Consent to Use of Data: You agree that MS, Microsoft Corporation, FORD MOTOR COMPANY, third party software and systems suppliers, their affiliates and/or their designated agent may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE or related services.
  • Page 444 DEVICE. UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes Only” or For Recovery Purposes...
  • Page 445 U.S. and other governments. For additional information, see http://www.microsoft.com/exporting/. TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers.
  • Page 446 End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
  • Page 447 Appendices WARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving.
  • Page 448 Appendices Distraction Hazard Any navigation features may require manual (non-verbal) setup. Attempting to perform such set-up or insert data while driving can seriously distract your attention and could cause an accident or other serious consequences. Stop the vehicle in a safe and legal manner before attempting these operations.
  • Page 449: Navigation End User License Agreement

    Appendices Map Data DVD End User License Terms The data (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and (Licensee).
  • Page 450 Appendices Disclaimer of warranty:(Licensee) and its licensors (including their licensors and suppliers) disclaim any warranties, express or implied, of quality, performance, merchantability, fitness for a particular purpose or non infringement. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
  • Page 451 Data provided to you hereunder. FCC Compliance Changes or modifications not approved by Ford could void user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits with the Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 452 Appendices Gracenote® End User License Agreement (EULA) This device contains software from Gracenote, Inc. of 2000 Powell Street Emeryville, California 94608 (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this device to do disc and music file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers (“Gracenote Servers”), and to perform other functions.
  • Page 453 Appendices THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATA AND THE GRACENOTE CONTENT ARE LICENSED TO YOU “AS IS.” NEITHER GRACENOTE MAKES ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ACCURACY OF ANY GRACENOTE DATA FROM THE GRACENOTE SERVERS OR GRACENOTE CONTENT.
  • Page 454: Index

    Index 911 Assist™ ......352 Anti-lock brake system (see Brakes) ......179 Anti-theft system ....70, 72 arming the system ....70, 73 ABS (see Brakes) .....179 disarming a triggered system ..74 Accessing call history/phone AppLink™ .........360 book during active call .....344 Audio system Accessing the help screen ..417 CD-MP3 ........122 Accessing the music in your...
  • Page 455 ......306 Child safety seats - booster Creating a playlist .....411 seats ..........22 Customer Assistance ....216 Cleaning the touchscreen ..385 Ford Extended Service Plan ........315, 317 Cleaning your vehicle ....260 Getting roadside assistance ...216 engine compartment ....262 Getting the service instrument panel ....264...
  • Page 456 Index Event data recording ....12 Exhaust fumes ......157 Defrost .......131, 133 rear window ......136 Dipstick Fail safe cooling ......246 automatic transmission fluid ..........248 Fleet MyKey programming ..58 engine oil .........242 Flexible Fuel Vehicle (FFV) ..159 Driving under special Floor mats .........214 conditions ........172 Fluid capacities ......306 through water ......213...
  • Page 457 Index odometer .........110 Jukebox features .......409 trip odometer ......110 Jump-starting your vehicle ..218 Hazard flashers ......217 Keyless entry system autolock ........66 HD Radio™ .......394 Keys ........55, 71 Headlamps positions of the ignition ..155 aiming ......253–254 bulb specifications ....259 flash to pass ......80 high beam .........80 Lamps bulb replacement...
  • Page 458 Index Media Bluetooth menu options Playing music (by artist, album, genre, playlist, tracks, (adding, connecting, deleting, similar) ........365 turning on/off) ......367 POI categories ......428 Message center ......99 display color ......104 Point of Interest (POI) .....428 english/metric button .....104 Power distribution box MyColor display ......104 (see Fuses) .......231 system check button ....104...
  • Page 459 Index opening the trunk .....66 heated ........144 replacing the batteries .....56 second row seats ....145 Reverse sensing system ...186 SecuriLock passive anti-theft system ..........70 Roadside assistance ....216 Selecting your media source (USB, Line in, BT audio) ..364 Setting a destination ....418 Safety Belt Maintenance ....42 Safety belts (see Safety Setting the clock .......122...
  • Page 460 Index Traffic, Directions and Information ........357 Temperature control Transmission (see Climate control) ..131, 133 automatic operation ....169 Temporary mobility kit .....295 brake-shift interlock (BSI) ..171 fluid, checking and adding Text messaging ......346 (automatic) ......248 Text messaging (sending, fluid, checking and adding downloading, deleting) ..347–348 (manual) .........248 fluid, refill capacities ....306...
  • Page 461 Index Windshield washer fluid and wipers ..........78 Warning lights (see Lights) ..94 checking and adding fluid ..249 replacing wiper blades ...252 Washer fluid ......249 Wrecker towing ......205 Water, Driving through .....213 Where am I? ......414 Windows power .........85 2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012 USA (fus)

Table of Contents