D-Link DI-2000 Series User Manual page 24

Use V.35 method as Figuer 3-6.
Figuer 3-6 V.35 Cross Cable Usage
V.28 cross cable connection is shown asFiguer 3-7.
Figuer 3-7 V.35 Cross Cable Connection
(2) Cross Cable on the Ethernet Port
Two DI-2000 series of routers can be across interconnected with TP cross cable
or AUI cross cable. TP cross cable can be used on straight connection of a
router and the TP interface of a single host LAN card. Such, a HUB can be
saved in a LAN. But a HUB is necessary when more than two Ethernet TP ports
are interconnected.
Connect two Ethernet ports(TP ports) with the TP cross cable.
DI-2000 Series Routers hardware installation manual
- 21 -