Operation Of Ignition Switch; Operation Of Steering Handle Lock Switch; Operation Of Seat Open Switch; Use Of Buttons - Sym Jet4 AD12W1-6; Jet4 AD12W1-6C User Manual

§ OPERATION OF IGNITION SWITCH §
" ON" position:
Ÿ Engine can be started in this position.
Ÿ Ignition switch key can not be removed.
" OFF" position:
Ÿ Engine is shut off and can not be started in this
position .
Ÿ Ignition switch key can be removed.
§ OPERATION OF STEERING HANDLE LOCK SWITCH §
" Steering handle lock" position
Ÿ Turn the steering handle to left and insert the key
into, press ignition switch key clockwise and then
lightly turn it to left to the " lock" position.
Ÿ The steering handle is locked in this position.
Ÿ Ignition switch key can be removed.
Ÿ When unlocking, simply turn the key from the
" LOCK" position to the " OFF" position.
CAUTION:
Ÿ
Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to " OFF" and " LOCK" position will shut off the electrical system and that may result in a
dangerous accident. Therefore, the ignition switch can only be turned off after the motorcycle
has been completely stopped.
Ÿ Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
Ÿ
If ignition switch remains in the " ON" position for a prolonged period after the engine has been
stopped, the battery' s capacity will be reduced and this may affect the engine' s start ability.
Ÿ
Make sure to take the key away with you before you lock your seat.
§ USE OF BUTTONS §
High/low
beam switch
Turn Signal
Switch
Seat open
Horn Switch
7
http://www.motorcycle.in.th
IGNITION SWITCH
CAUTION:
Ÿ
Make sure to take the
key away with you
before you lock your
seat.
Light switches
Electrical starter
button