Technical Parameters; Operation Instruction; Operation With A Mechanical Key; Unlocking With A Mechanical Key - Q-See QSB180 User Manual

LOCK
1.5

Technical parameters

Item
No:
Fingerprint sensor
Sensor resolution
Antistrike ability of
sensor surface
Authentication speed
Authentication methods
FRR
FAR
Angle for putting finger
Fingerprint scanning
Fingerprint template
saved
User capacity
Light jam
Sensor surface
Operating voltage
Battery life
Temperature for storage
Static current
Dynamic current
5 Operating Environment
Indoor Temperature
Outdoor Temperature
Humidity
Technical parameters
Optical sensor
500 dpi 500 dpi
Remain good condition after being jabbed
with a 4H pencil at a 20cm's distance.
1 second
1:N or 1:1
1%
0.0001%
45
Once to get one fingerprint template
All enrolled fingerprint template will be saved
while replacing the batteries
138 max
Sunlight resistable
Optical glass with PVD coated
4 AA alkaline batteries,DC 4.5~6.0v
Approx 12 months
-25 -85
10 A
110mA~180mA

2.Operation instruction

Operation with a mechnical key
2.1

Unlocking with a mechanical key

Step 1: Take out cylinder cover with cylinder cover opener. (figure 2-1)
Step 2: Insert mechanical key into the keyhole, turn the mechanical
key ( 90 anticlockwise if right handed lock, 90
handed lock). (figure 2-2)
Step 3: Rotate outside handle to unlock the door. (figure 2-3)
NOTE: Mechanical key can unlock the door at any time.
clockwise if left