Getting Started - Brava SLIK DS-197 User Manual

2 Getting Started

Insert the battery
Before battery replacement, please confirm you have switched off the phone.
Insert SIM card/cards:
1. Before SIM card installation or replacement, please make sure you have switched off your
phone and taken the battery out.
2. Make the metal magnetic strip of the SIM card contact with the metal strip, and place it in the
slot.
Charger the battery
1. Before charging, please confirm you have correctly installed the battery into the phone.
2. Plug the charger port into the jack and then connect the charger with AC power.
3. If the phone is off during charging, the screen will display the charging animation. When the
phone is on, the user may use the phone during charging. When the charging is completed,
the charging animation on the screen will stop in full-capacity state of the battery. Please use
the phone when the battery is fully charged after the power is completely used up for the
first time; charge it after the power is completely used up for the second time, as a result,
the battery will reach the best state after three consecutive cycles.
4. If the battery voltage is too low due to long-term non-use and other reasons, the screen will
be blank when charging and will display the charging animation after several minutes.
Warning: please do not move or remove the battery during charging to avoid severe burning of
the phone circuit.
10