Advertisement
Full operational procedures for PeripheralVision
in the program helpfile, refer to this if any problems are
encountered in the procedure detailed below.
1 Install PeripheralVision
2 Ensure the router hardware installation is complete.
3 Using the Locate NPMP
4 Left click twice on the icon to open up the property pages of the
device. The default displayed page will be the Name page.
This is shown below:
5 In the Icon Title field enter a name for the router that will allow it
to be identified on the PeripheralVision
6 Using the arrows in the top right corner, scroll the pages and
click on the first IP Router page. This is shown following:
®
onto a PC on the Ethernet network.
PeripheralVision
address (11.22.33.44). The router will appear
on the network map, it will be an icon similar to
the example on the left.
®
TM
discovery tool in
®
, enter the default set IP
®
network map.
are detailed
Advertisement
