Specifications - Numark M101USB Quick Start Manual

SPECIFICATIONS

INPUTS
Line:
Phono:
Mic:
OUTPUTS
Line:
Headphone:
DISTORTION
< 0.01%
SIGNAL-TO-NOISE RATIO (maximum output; JIS-A weighted)
Line:
Phono:
Mic:
FREQUENCY RESPONSE
Line:
Phono:
Mic:
CHANNEL EQUALIZER
Treble:
Bass:
MIC EQUALIZER
Treble:
Bass:
POWER CONSUMPTION
3.7 W typical
6.3 W with full headphone output
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
10 kΩ input impedance
90 mV rms sensitivity for 1.22 V output
47 kΩ input impedance
1.1 mV rms sensitivity @ 1 kHz for 1.22 V output
600 Ω input impedance unbalanced
1.15 mV rms sensitivity for 1.22V output
67 mV rms max input
7.35 V rms max
0.5 W into 47 Ω
> 97 dB
> 81 dB
> 96 dB
20 Hz – 20 kHz (±0.5 dB)
±1 dB except for controlled attenuation of -3 dB @ 20 Hz to reduce rumble and feedback
20 Hz – 15 kHz (±0.5 dB)
+10 / -28 dB @ 15 kHz
+12 / -32 dB @ 60 Hz
+/-12 dB @ 15 kHz
+/-12 dB @ 100 Hz