Alarm Input And Output Connection - IC Realtime Mobile Network Video Recorder User Manual

Please refer to the following sheet for detailed information.
Audio/video output cable is shown as below. See Figure 3-7. You can use it when your monitor
port is general BNC port.
Please refer to the following sheet for detailed information.
Audio/Video Output Cable (Aviation-level port 4p male socket )
Socket
1
2
3
4
Note
For some special series products, you need contact your local retailer for additional audio/video
output cable.
3.6 3.6 Alarm Input and 3.6 3.6 Alarm Input and Output Alarm Input and Alarm Input and
There are two alarm input types for you to select: normal open (NO) and normal close (NC).
1. Alarm input
a. Alarm input mode supports grounding alarm input.
b. Alarm input supports 12V-24V voltage signal alarm input.
SN Function
12V external camera power. It is
1
less than 1.5A.
2 GND
3 Audio port
4 Video port
Figure 3-7
Color and Definition
Yellow BNC male port（Video output）
White BNC male port（Audio output）
DC power male socket. External is negative and internal
is positive.
（12V power output）
DC power male socket. External is negative and internal
is positive.
（12V power output）
Output Connection Output Output Connection Connection Connection
15