IC Realtime Mobile Network Video Recorder User Manual page 148

Please refer to the following sheet for detailed information.
Type Parameter
Alarm Video loss
Type
Motion detection
Disk full
Disk error
Camera masking System alarms when camera is viciously masking.
External alarm
Offline alarm
IPC
alarm
IPC offline alarm
Operation Listening alarm
Video
Figure 6-71 Alarm
Function
System alarms when video loss occurs.
System alarms when motion detection alarm
occurs,
System alarms when disk is full.
System alarms when disk error occurs.
Alarm input device sends out an alarm.
NVR local-end offline alarm.
external It refers to the on-off alarm signal from the front-end
device and can activate NVR local operation.
System can generate an alarm when the front-end
IPC disconnects with the local NVR.
System notifies web when an alarm occurs (you
select from the above event type), and then web
can notify user.
When an alarm occurs, system auto enables video
monitor.
This function only applies to video detection alarm
(motion detection, video loss and camera masking).
This function is not available in current device.
139