Belkin N300 User Manual page 23

Using YOUR ROUTER
Configure the parameters below .
PPtP Account and PPtP Password: Enter the PPtP account
and password provided by the ISP . the PPtP account
and password are used to log in to the ISP server .
Retype Password: Enter the password again .
host name: (optional) Enter the host name .
Service Address: Enter the IP address of the ISP server .
IP Address Assignment: You can select either to dynamically
get an IP address from the ISP or to use a static IP address .
If you select "use Static IP Address", manually enter the IP
address, the subnet mask, and the default gateway .
If you select the "Disconnect after xxx minutes of no
activity" check box and specify a time interval, the system
interrupts the Internet connection when there is no
Internet access behavior within the specified time .
23