Advertisement
~
REFERENCE SERIES
- - - - ~
Most pre-terminated speaker cables have color-coded connectors that make it easy to match
output and inputs correctly. If yours do not, or if you are making your own out of paired, two-
conductor wire, look for identifying marks on the insulation of the two conductors. Normally
there will be printing, a stripe or a molded ridge along one of the conductors.
away from small speakers that cannot. Any of the Klipsch Reference Series bookshelf models
can be set to Large in your receiver or processor's speaker setup menu if necessary. But if your
system includes a good powered subwoofer, you probably will get better overall performance by
using the Small setting and letting the sub handle the low bass, especially in the case of speak-
ers having a single woofer less than 6.5 inches in diameter.
~
CARE AND CLEANING
1
_
The only thing you should ever need to do to your speakers is dust them occasionally. Never
apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles
with the brush attachment of a vacuum cleaner.
The Warranty below is valid only for sales to consumers in the United States or Canada.
KLiPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and
workmanship (subject to the terms set forth below) for aperiod of five
(5)
years from the date of
purchase. During the Warranty period, KLiPSCH will repair or replace (at KLiPSCH's option) this
product or any defective parts (excluding electronics and amplifiers). For products that have
electronics or amplifiers, the Warranty on those parts is for a period of two
(2)
years from the
date of purchase.
_I
WARRANTY - U.S. AND CANADA
ONLY
1
_
er
~~ ~~
AMP
~~ ~~
c~
cb
ftS_aker
Right Speak
leave strap)
(leave strap
<{?
=
<{?
=
o~ ~
&
!~ ~
All power offl
La
(
Figure 5
Bi-wiring - In bi-wiring, separate cables are connected from the amplifier or receiver output ter-
minals to the speaker input terminals for the tweeter and woofer. (see Figure
6.)
This results in
lower electrical resistance between the amplifier and speaker than single-wiring with the same
gauge cable. In some cases bi-wiring may be preferable to single-Wiring with lower-gauge
cable, which will be thicker and probably less flexible.
To obtain Warranty service, please contact the KLiPSCH authorized dealer from which you pur-
chased this product. If your dealer is not equipped to perform the repair of your KLiPSCH product, it
can be retumed, freight paid, to KLiPSCH for repair. Please call KLIPSCH at t -BOO-KLIPSCH for
instnuctions. You will need to ship this product in either its original packaging or packaging affording
an equal degree of protection.
This Warranty is only valid for the original purchaser and will automatically terminate prior to
expiration if this product is sold or otherwise transferred to another party.
Proof of purchase in the form of abill of sale or receipted invoice, which is evidence that this
product is within the Warranty period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from
this product or (b) this product was not purchased from aKLIPSCH authorized dealer. You may call
1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a
KLiPSCH authorized dealer.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence,
acts of God, accident, commercial use or modification of, or to any part of, the product. This
Warranty does not cover damage due to improper operation, maintenance or installation, or
attempted repair by anyone other than KLiPSCH or a KLiPSCH dealer which is authorized to do
KLiPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not
cover product sold AS IS or WITH ALL FAULTS.
r
p)
Figure 6
(~ (~
AMP
~~ ~~
p
ftS_aker
RlghtS~ke
move strap)
(remove stra
<{?
=
<{?
=
~ ~~
@@
~~ (~
&
~~ @
All power offl
La
(re
To bi-wire your Reference Series speakers, loosen the nuts on the binding posts and remove the
metal straps or wire jumpers linking the woofer and tweeter terminals. Observing proper polarity,
connect one cable to the tweeter binding posts (upper) and another to the woofer binding posts
(lower). Run both cables back to your amplifier or receiver and attach them to the same channel.
(Do not, for example, attach one to an Aspeaker output and the other to a Bspeaker output on
an amplifier or receiver with AlB speaker switChing.) Amplifiers may be severely damaged if
straps are not removed.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE
REMEDY OF THE CONSUMER. KLiPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT EXCEPT
TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY is EXCLUSiVE
AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING
BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR APRACTICAL
PURPOSE.
Biamping - In biamplification, the tweeter and woofer are driven by separate amplifiers fed from
the same preamplifier output. We do not recommend biamplifying any of our speakers, since in
general it will produce no benefit that could not be obtained simply by using a single larger ampli-
fier and may cause severe sound degradation if not done properly. If you do biamplify, use the
same model amplifier for the tweeter and woofer sections (to prevent frequency-response errors
caused by different amplifier gains) and be sure to remove the straps linking the two sets of input
terminals on the speaker. Amplifiers may be severely damaged if straps are not removed.
~
BASS
MANAGEMENT SETTINGS
1---------------
Surround-sound receivers and processors use what is known as bass management to ensure
that low frequencies in the various channels are sent to speakers that can handle them well and
Some states do not allow the exclusion or limitation of incidental or consequential damages
or implied warranties so the above exclusions may not apply to you. This Warranty gives you
specific legal rights, and you may have other rights, which vary from state to state.
~
WARRANTY OUTSIDE THE UNIIED STATES AND CANADA
1
_
The Warranty on this product if it is sold to a consumer outside of the United States or
Canada shall comply with applicable law and shall be the sole responsibility of the distributor
that supplied this product. To obtain any applicable warranty service, please contact the dealer
from which you purchased this product, or the distributor that supplied this product.
Advertisement
