Casio Exilim EX-ZR1200 User Manual page 207

Memory Full
Printing Error
Record Error
SYSTEM ERROR
The card is locked.
There are no files.
There are no
printing images. Set
up DPOF.
There is no image to
register.
This card is not
formatted.
This file cannot be
played.
This function cannot
be used.
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord CS,
this message indicates that there is not enough memory
capacity to record all of the pre-recorded images. Delete
files you no longer need (page 39).
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some
reason during image data recording. Perform a zoom
operation to change the composition of the image and
shoot it again.
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The LOCK switch of the SD, SDHC, or SDXC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
There are no files in built-in memory or on the memory
card.
There are currently no files specified for printing. Configure
the required DPOF settings (page 154).
The setup you are trying to save is for an image that cannot
be saved as a user "CUSTOM SHOT" scene.
The memory card loaded in the camera is not formatted.
Format the memory card (page 184).
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
207
LOCK
Appendix