Using Prerecord Movie - Casio Exilim EX-ZR1200 User Manual

NOTE
• The higher the frame rate (speed), the more lighting is required when shooting.
When shooting a high speed movie, shoot in a well-lit environment.
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high speed movie, there are
black bands along the top, bottom, left, and right of the screen.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
• Monitor screen content switching is disabled during high speed movie recording.
Using Prerecord Movie (Prerecord (Movie))
Prerecord (Movie) maintains a pre-recording of approximately five seconds of action
(approximately two seconds for High Speed Movie). When you start real-time
recording, the pre-recorded content is stored followed by the real-time recording, to
help make sure you do not miss anything by being late pressing the record button.
Approximately 5-second prerecorded part (from the buffer)
• Approximately two seconds for high speed movie
[0] (Movie)
Movie
Real-time recording start
76
[0] (Movie)
Real-time recording end
Recording Movies