System Resetting; About The System Reset Button - Pioneer RS-A9 Owner's Manual

Before Using This Product

System Resetting

About the System Reset button

If network, equalizer and other audio settings are stored in memory (B1, B2, M1, M2 or
M3), you can reset the system without erasing the stored settings. This is also convenient
when you want to use previous audio setting after changing the mode or system.
Before system resetting
• If this product operates incorrectly, first press the system reset button. If this does not
solve the problem, press the all clear button after consulting with your dealer.
• When you press this product's system reset button, also press the RESET buttons of all
connected digital amps.
• Press the system reset button when the operation status of this product (RS-A9) is source
OFF. If this product is not connected to the power supply or ACC is set to OFF, the sys-
tem is not reset even if you press the system reset button. Also confirm that the RS-D7R
source is OFF.
System resetting
If you change the network mode switch setting or the system, remove this product's top
cover and press the system reset button for 1 second or more using the small supplied
hexagonal wrench.
Also press the system reset button in the same way when you switch power to this product
ON for the first time after purchasing or if this product's built-in microcomputer operates
incorrectly.
• Carefully store the supplied hexagonal wrench.
7
Hexagonal wrench
(Small)
System Reset