Operating Modes And Controls - Bounty Hunter Tracker II Owner's Manual

OPERATING MODES AND CONTROLS

The Tracker II has Three Operating Modes
ALL-METALS
1
a. All metals are detected
b. Single tone response, regardless of metal type
c. Maximum depth detection capability
Operating Controls
DISCRIMINATION knob does not apply
APPLICATIONS
Relic Hunting, Cache Hunting and general applications like
property marker locating
TONE
2
a. Ferrous metals are automatically eliminated from detection.
b. Two-tone audio response classifies metals as illustrated:
RESPONSE
Iron & Steel
c. Adjust the DISCRIMINATION Control when encountering low-tone
objects. If the Disc control can be adjusted to induce a broken (or
scratchy) tone, the buried item is probably trash. A broken tone
can usually be achieved between the 12:00 and 2:00 positions.
APPLICATIONS
Coin Shooting
Jewelry Hunting
DISC: Full Discrimination
3
a. Ferrous metals are automatically
eliminated from detection.
b. Two-tone audio response classifies
metals as illustrated above under
the Tone mode.
c. Adjust the DISCRIMINATION
control knob to completely
eliminate unwanted items from
detection. Metals are eliminated
from detection as illustrated:
TONE MODE AUDIO RESPONSES
NO LOW
TONE
Gold & Nickel
BROKEN
TONE
Old & New Pull Tabs Copper, Silver & Brass
HIGH
TONE
7