Operation - JustCom 201ASU User Manual

JC-201ASU/401ASU
Operation - Software Switching for Windows Users
JustCom's Auto Switch provides Windows users with AOD (Access-On-
Demand) switching software. All computers stay connected with instant
access to your USB device at the click of a mouse.
AOD Legend
Green -the USB device is free for use (Ready status)
Yellow -the USB device is currently being used by your computer
Red - the USB device is currently being used by another computer or is
disabled
To access the USB device:
1. Double Click on the "USB Share Ctrl" desktop icon to open the
application
2. Make sure that the Auto Switch's Auto LED is selected. This can be
done by simply repeatedly pressing the manual port selector on the
front of the Auto Switch (see pg 5) until the Auto LED position is
selected. Or you can simply hold down the manual port selector for
roughly 3 seconds and it will jump to the Auto LED position.
3. Double Click on the "USB Share Ctrl" icon on your taskbar.
4.You are now able to use the connected USB device from your
computer.
Note: The Auto Switch is designed for use with a single USB
peripheral device. The use of multiple devices via a USB
hub is not recommended.
-8-