Download Table of Contents Contents

Table Of Contents - AirSource 3000 Owner's Manual

Purification system
Table of Contents

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3000 and is the answer not in the manual?

Questions and answers

Diane
February 13, 2025

I want to replace the bulb that is in the module How do you do it????

1 comments:
Mr. Anderson
February 13, 2025

To replace the bulb in the AirSource 3000 module, follow these steps:

1. Switch the unit off.
2. Remove the old module by turning the screw counterclockwise and slowly backing it out until it is completely disengaged. Discard the old module.
3. Insert the new module into the unit and turn the screw clockwise until the module is flush with the outer wall. Do not over-tighten.
4. Switch the unit on. If the light does not come on, check the fit of the module and tighten the screw if necessary.

For a replacement Photohydroionization™ Module, contact your AirSource representative and use Item Code #55103.

This answer is automatically generated

Marilyn
April 11, 2025

Do you sell replacement module for Air Source 309, or where I can purchase? Please advise. Thanks you.

1 comments:
Mr. Anderson
April 11, 2025

You can purchase a replacement module for the AirSource 3000 from Ubuy. The item is listed as "Air Source 3000 Genuine New OEM Replacement Module #55103."

This answer is automatically generated

Table of Contents

Save PDF