Table of Contents
Advertisement
How Does Your AirSource
The AirSource
3000 is an extremely effective indoor air purifying system.
®
It works through a patented combination of technologies —
Photohydroionization
technologies work:
Photohydroionization
An advanced oxidation reaction occurs when light energy from the ultraviolet
(UV) lamp reacts with oxygen, ozone, a small amount of moisture in the air, and
the hydrated Tri-metallic Catalyst. This reaction creates cleansing ions, such as
hydroperoxides and superoxide ions, which are mixed with the air. The treatment
of your air includes:
Suppression of bacteria growth (bacteriostatic)
Suppression of mold growth (mycostatic)
Reduction of odors
Reduction of VOCs (Volatile Organic Compounds)
Hydrated
Tri-metallic
Catalyst
Photohydroionization
Module (#55103)
5
* and Electron Generation. Here's how these two
™
* Module
™
3000
®
Ultraviolet
Lamp
Electron
Generator
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3000 and is the answer not in the manual?
Questions and answers
I want to replace the bulb that is in the module How do you do it????
To replace the bulb in the AirSource 3000 module, follow these steps:
1. Switch the unit off.
2. Remove the old module by turning the screw counterclockwise and slowly backing it out until it is completely disengaged. Discard the old module.
3. Insert the new module into the unit and turn the screw clockwise until the module is flush with the outer wall. Do not over-tighten.
4. Switch the unit on. If the light does not come on, check the fit of the module and tighten the screw if necessary.
For a replacement Photohydroionization™ Module, contact your AirSource representative and use Item Code #55103.
This answer is automatically generated
Do you sell replacement module for Air Source 309, or where I can purchase? Please advise. Thanks you.
You can purchase a replacement module for the AirSource 3000 from Ubuy. The item is listed as "Air Source 3000 Genuine New OEM Replacement Module #55103."
This answer is automatically generated
How do I get to the module?
To get to the module do remove the back?