Table of Contents
Advertisement
Troubleshooting the Unit
Symptom
No power — fan, lamp,
and electron generator do
not function.
Fan is not working.
Lamp is not working.
Specifications
Operational
. . . . Electron Generation
Electrical
. . . . . . Supply Voltage
Mechanical
. . . . Dimensions
Regulatory
. . . . . Complies with electrical and mechanical requirements of the
*All trademarks are the property of their respective owners.
7
Solution
Check to see if the cord is plugged in and the unit
is switched on.
Check to see that outlet is working.
If the outlet is controlled by wall switch, make sure it's on.
Check to make sure the unit is plugged in. If fan still
fails to work, call 1-866-GREAT-AIR (1-866-473-2824).
Check the Photohydroionization
make sure it is securely screwed into place (do not
over-tighten the screw). If the lamp doesn't work,
replace with a new Module. If the lamp still doesn't
work, call 1-866-GREAT-AIR (1-866-473-2824).
Warranty
Power
Weight of Unit
Shipping Weight
Free Air Delivery Fan 13 CFM
UL 867 Standard. Emits ozone at or below 0.05 ppm.
Self-limiting high-voltage Electron Generator
Three-Year Limited Warranty on parts
and workmanship
120 VAC, 60 Hz
0.5 amps/55 watts
16" height x 9" diameter
7 pounds
9.6 pounds
* Module and
™
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3000 and is the answer not in the manual?
Questions and answers
I want to replace the bulb that is in the module How do you do it????
To replace the bulb in the AirSource 3000 module, follow these steps:
1. Switch the unit off.
2. Remove the old module by turning the screw counterclockwise and slowly backing it out until it is completely disengaged. Discard the old module.
3. Insert the new module into the unit and turn the screw clockwise until the module is flush with the outer wall. Do not over-tighten.
4. Switch the unit on. If the light does not come on, check the fit of the module and tighten the screw if necessary.
For a replacement Photohydroionization™ Module, contact your AirSource representative and use Item Code #55103.
This answer is automatically generated
Do you sell replacement module for Air Source 309, or where I can purchase? Please advise. Thanks you.
You can purchase a replacement module for the AirSource 3000 from Ubuy. The item is listed as "Air Source 3000 Genuine New OEM Replacement Module #55103."
This answer is automatically generated
How do I get to the module?
To get to the module do remove the back?