Table of Contents
Advertisement
•
Edit Shared Views: Ability to create and edit views in shared groups in the
NetGuard/NetGuard-EVS. Views placed in shared groups can be accessed by every
NetGuard/NetGuard-EVS user (for more information about views, see
(NetGuard) or the separate NetGuard-EVS documentation). If a user/group does not have
this right, shared groups in the NetGuard/NetGuard-EVS will be protected, indicated by a
padlock icon.
Note: Views created in a NetGuard can only be shared with other NetGuard users.
Views created in a NetGuard-EVS can only be shared with other NetGuard-EVS users. It
is not possible to share views across the two types of client.
•
Edit Private Views: Ability to create and edit views in private groups in the
NetGuard/NetGuard-EVS. Views placed in private groups can only be accessed by the
NetGuard/NetGuard-EVS user who created them (for more information about views, see
Creating Views
user/group does not have this right, private groups in the NetGuard/NetGuard-EVS will be
protected, indicated by a padlock icon. Denying remote users the right to create their own
views may make sense in some cases; for example in order to limit bandwidth use.
Tip: By clearing the View Live, Browse and Setup check boxes you can effectively disable the
user's/group's ability to use the NetGuard/NetGuard-EVS, for example while the user is on
vacation. This would typically be a temporary alternative to deleting the user/group.
3. In the User Rights for Camera section's Defined Cameras list, select each camera to which the
user/group should have access in the access client.
Tip: By pressing the CTRL or SHIFT buttons on your keyboard while selecting cameras in the
Defined Cameras list, you are able to select several or all of the listed cameras in one go.
4. Click the >> button to move the selected cameras to the Viewable by selected user list.
5. For each camera now listed in the Viewable by selected user list, specify the features to which
the user/group should have access, by selecting the features in the User Rights for the Selected
Camera section.
Note that the features are listed in two columns: the left column lists features related to live
viewing, the right column lists features related to browsing existing recordings:
In the Live column, the following features, all selected by default, are available:
•
Live: Ability to view live images from the selected camera.
•
PTZ: Ability to use navigation features for PTZ (Pan/Tilt/Zoom) cameras. A user/group
will only be able to use this right if having access to one or more PTZ cameras.
•
PTZ Preset Positions: Ability to use navigation features for moving a PTZ camera to
particular preset positions. A user/group will only be able to use this right if having access
to one or more PTZ cameras with defined preset positions.
•
Outputs: Ability to trigger outputs (e.g. switching on lights, sounding sirens, or similar),
if such outputs are available.
•
Events: Ability to use the NetGuard-EVS' Event feature for manually triggering events.
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | info@onssi.com | page 173
(NetGuard) or the separate NetGuard-EVS documentation). If a
OnSSI NetDVMS Rev 6.5
Image Server Administration
Creating Views
Advertisement
Table of Contents
