Server Configuration Section - OnSSI NetDVMS 6.5 User Manual

Surveillance system
Table of Contents

Advertisement

Server Configuration Section

The Server Configuration section is used for specifying server name and port, for enabling
optional external access to the server, for optional definition of IP address ranges which should be
recognized as being local, and for specifying a maximum number of remote users allowed to
connect simultaneously.
The Server Configuration section contains the following fields and buttons:
Field,
Button
Name
Port
Enable
Outside
Access
Outside IP
Address
Outside Port
Local IP
Ranges...
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | info@onssi.com | page 159
Description
Lets you specify a name for the server.
By default, the name is simply Server. You can of course change the
default name to a name of your choice.
NetGuard and NetGuard-EVS users with rights to configure their
clients will see the name of the server when they create views on
their client's Setup tab.
Lets you specify a port number to use for the server.
The default port number is 80. You are able to change the default
port number.
Select the check box if the server should be accessible from the
internet via a router or firewall.
If selecting this option, also specify the outside (public) IP address
and port number in the Outside IP Address and Outside Port fields.
Note: When using outside access, the router or firewall used must
be configured so requests sent to the outside (public) IP address and
port are forwarded to the inside (local) IP address and port of the
server running the Image Server service.
Lets you specify a public IP address for use when the server should
be available from the internet.
Lets you specify a port number for use when the server should be
available from the internet.
The default port number is 80. You are able to change the default
port number.
Opens the
Define local IP ranges
define IP address ranges which the Image Server should recognize
as coming from a local network.
OnSSI NetDVMS Rev 6.5
Image Server Administration
window, in which you are able to

Advertisement

Table of Contents
loading

Table of Contents