Transferring Files To /From Ultio To Pc / Nas Over The Network - Mvix Ultio User Manual

Transferring Files to / from Ultio to PC / NAS over the Network
One of the unique features of Mvix Ultio is its ability to transfer media files from a local PC or Network-
attached storage (NAS) device using the network connection. Once the Mvix Ultio is setup on your network,
transferring files across network devices (PC, NAS, etc.) can be accomplished simply via the Mvix Remote.
Using the Mvix Ultio remote, press the "Copy" button. Screen similar to the one below pops up:
Simply select the source location of your media file. Browse to the source location and press
"SELECT" on the remote. To copy media files from your:
o USB Drive you will select "USB"
o Local Hard Drive (inside Mvix Ultio) you will select "HDD"
o DVD drive (connected to Ultio via USB), you will select "DVD"
o Network (e.g. a shared folder on your network, PC, NAS etc.) you will select "NET"
Press the right arrow on the remote to move to the Destination column and select where you want
to copy / move your media file. To copy / move media files to your:
o USB Drive attached to your Mvix Ultio, select "USB"
o Local hard drive installed on your Mvix Ultio, select "HDD"
o Networked PC, NAS or a shared folder on your network, select "NET"
o Trash (i.e. Delete files from the source), select "SOURCE"
Next, browse for media files on the source and SELECT the one you want to copy / move.
Press the "Select" button on the remote to select media files. You can also select entire directories or
multiple files in a single directory.
Next, browse the destination - where you want to copy/move the media files. Press the RIGHT arrow
button.
An option to copy or move is provided. CAUTION: Moving files will remove them from the source.
Depending on your network speeds and file size, it may take few minutes or more to complete the
copy or move process.
Media to/from Ultio
The two columns are indicated as "Source" and
"Destination"
o Source is the location where the media file
o Destination is the location that you want to copy /
28
currently resides. (e.g. "USB" means that the media
file currently resides on the USB-Drive attached to
Mvix Ultio)
move the media file. (e.g. "TRASH CAN" means that
you want to move the media file to the trash – i.e.
delete the file)