Getting Started - Mvix Ultio User Manual

Getting Started

To get started you need to :
Connect audio and video cables to Mvix Ultio and your widescreen TV or home theater
receiver
Connect Mvix Ultio to a Power Outlet
Connect Mvix Ultio to your wireless or wired network via your router or switch
Before you begin, look at the back of your TV or receiver and locate the AV ports. Ensure you
have the appropriate cables for your setup.
Audio-Video Connection
The Mvix Ultio is designed for video-output via a variety of AV connections , such as
composite(AV),component(YPbPr) and HDMI. Depending on your current AV setup, you
can decide which mechanism is most suitable for you. The Mvix Ultio is configured such
that it can detect video output automatically, making the AV link to TV hassle-free.
If choosing a Composite (RCA-type: Red, Yellow and White) cable:
Plug the yellow connector into the AV output of Mvix Ultio and AV input of TV, and plug
the red and white connector into the audio input of TV or Stereo amplifier / receiver.
Turn on the TV and select AV mode. Power on the Mvix Player and it should display the
Home Screen of Mvix Ultio.
Initial Setup
to your TV
16