Appendix E. Apple Mac IP Setup
An Apple Mac can be used as the management workstation for setup of a DFL-160. Usually
configuration of the IP address of the MAC's chosen Ethernet interface should not be needed since
the DFL-160 automatically assigns the address using DHCP. If DHCP cannot be used, the
workstation IP address should be configured manually. The steps to do this with MacOS X are as
follows:
1.
Go to the Apple Menu and select System Preferences.
2.
Click on Network.
3.
Select Ethernet from the left sidebar menu.
4.
Select Manually in the Configure pull down menu.
127