Zooming; Checking The Captured Image Immediately; Manual Recording - JVC Everio GZ-MS250 User Manual

Recording
Do not use this unit in the rain, snow, or places with high humidity like
●
the bathroom.
Do not use this unit in places subject to excessive humidity or dust, as
●
well as places exposed to steam or smoke directly.
The access lamp lights up when still image recording is in progress. Do
●
not remove the battery pack, AC adapter, or SD card when the lamp is
lighted.
Memo:
Before recording an important scene, it is recommended to conduct a
●
trial recording.
DIS does not work when recording still images.
●

Zooming

The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
●
Use the T end (telephoto end) to magnify the subject for shooting.
●
.
You can also use the slider's T/W zoom to zoom.
●
.
Memo:
Only optical zoom is available in the still image recording mode.
●

Checking the Captured Image Immediately

You can check the most recently captured images while in the recording
mode. (Quick Review)
.
Memo:
You can also delete the image after checking.
●
Quick Review can no longer recall the most recently captured image
●
once the power is turned off.
Use the playback mode to check the image in this case.
Video
●
"Checking the Captured Image Immediately(Video)" （A P.22）
24

Manual Recording

You can adjust settings, such as brightness and shutter speed, by using
the manual mode.
Manual recording can be set for both video and still image modes.
1
Select video or still image mode.
.
The video or still image mode icon appears.
●
2
Select the Manual recording mode.
.
The mode changes between Auto and Manual with every touch.
●
3
Start recording.
.
Press again to stop.
●
Memo:
The manual settings are displayed only in the manual mode.
●