Removing and installing components during servicing
Attaching the cover
► Place the cover in the correct mounting position (1).
Make sure that you have tightened the screws correctly and that
the keyboard is firmly seated.
Make sure that you use the correct screws, they have different lengths.
► Tighten the screws (2).
► Insert the battery (see Chapter
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
56
2
2
2
2
2
1
"Inserting battery", Page
"Inserting battery", Page
2
2
2
33).
33).
Fujitsu