Apex Digital DESTINY 6100 SERIES Owner's Manual page 23

Glossary
(cont'd)
LCD - Liquid Crystal Display. Will display all system status in
English text.
LED - Light Emitting Diode. These are used as indicators of the
system conditions on keypads.
NIGHT - Arming mode used specifically for when everyone is in for
the "NIGHT". All perimeter zones become instant, there is no
entry/exit delay, and some interior zones can be active.
PERIMETER ZONES - Zones consisting of door and window contacts
and glass break detectors which will detect an intruder before he
gains entry into the premises.
PREALARM SPEECH - When the system is armed, and someone
enters the premises through a "delay" door, the system speaks
"ENTRY DETECTED" followed by the word description programmed
for that door. EXAMPLE: "ENTRY DETECTED, FRONT
DOOR...ENTRY DETECTED, FRONT DOOR". This speech will be
heard for the duration of the entrance delay. If the disarm code is not
entered within the programmed amount of time, the BURGLAR
ALARM will sound. If an alarm took place while you were gone, then
the system would speak "system showing alert", followed by the pre-
alarm speech.
PREALARM TONE - If prealarm speech is not programmed, there
will be a steady, low volume sound emitted through the speakers
when the entry delay door is opened. This tone will continue until the
disarm code is entered to disarm the system. If the disarmed code is
not entered within the programmed time, the BURGLAR ALARM will
sound. A pulsing pre-alarm tone indicates there was activation while
you were gone.
ZONE - Any area or point of protection in the security system such as
doors, windows, and all other areas covered by detection devices.
23