Apex Digital DESTINY 6100 SERIES Owner's Manual page 22

Glossary
(cont'd)
DISARM - To turn the security system OFF or to silence alarm
activation, including fire alarms, that may occur while the system is
armed.
DISARM CODE - The three or four-digit number you enter to disarm
the security system. The system will accept 32 different disarm codes,
including disappearing and duress codes. Your disarm code allows
you to control the alarm system from system keypads, local phones,
and remote phones. Have your installer give you a list of the different
codes.
ENTRANCE DELAY - Time permitted to enter the armed premises
and disarm the security system before the alarm is activated. A 20-
second delay is automatically set at the factory, but your installer can
increase or decrease this amount of time as desired.
EXIT DELAY - Time permitted to leave the premises after arming
the system. A 30-second delay is automatically set at the factory, but
your alarm installer can increase or decrease this amount of time as
desired.
EXTENDED MONITOR - Allows a zone to speak continuously or for
a programmable time period when tripped. EXAMPLE: "Pool door
open, pool door open..."
FORCE ARM - To override the security system's initial refusal to
arm because of an open zone. When a system is forced armed it will
disregard or ignore any open zones until they have been closed.
HOME - Arming mode for use when you are at "HOME". Only
perimeter devices are armed allowing you to move about freely within
the premises without fear of setting off the alarm. The system can be
programmed to eliminate all entrance delays when armed to home.
This might be preferable to individuals who live alone.
INTERIOR ZONES - Zones consisting of motion detectors and other
devices that are located within the premises.
22