Electrolux E30GC74GPS2 Installation Instructions Manual page 4

13" (33cm) max. d epth
forcabinet installed a bove
cooktop
30" (76.2cm) Min.
Clearance Between t he
Top oftheCooking
Platform andthe Bottom
of anUnprotected Wood
or Metal
C abinet "_.
,eo
24" (61cm) Min. w
Bottom of Wood
or Metal Cabinet
is Protected by Not
Less Than 1/8" Flame
Retardant Millboard
Covered With Not
Less Than No. 28 MGS
Sheet Steel, 0.015"
(0.4mm) Stainless
Steel, 0.024" (0.6mm)
Aluminum or 0.020"
(0.5mm) Copper
18" (45.7cm)
Min.
2" (5.1cm) min. distance
between rear edge
of cutout and nearest
combustible surface
above countertop
\
30" (76.2cm) min.
clearance between
the top of the
cooking platform and
the bottom of an
unprotected wood or
metal cabinet.
24" (61,X_cm_ l
It is not recommended to use
drawer underneath cooktop.
To eliminate the risk of burns
or fire from reaching over heated surfaces,
cabinet storage space located above the
cooktop should be avoided. If cabinet
storage is provided, risk can be reduced
by installing a range hood that projects
horizontally a minimum of 7" (17.8cm) 36" (91.4cm) 36" (91.4cm)
beyond the bottom of the cabinets. 30" (76.2cm) 30" (76.2cm)
9" (22.9 cm) 9" (22.9 cm)
5" (12.7 cm) 5" (12.7 cm)
Figure 3 - CABINET DESIGN