Table of Contents
Advertisement
Installation
Instructions
D_
ALIGNING
THE WALL PLATE
Horizontal Line
!;22 _ :222:.....
HoleA
Area E
CAUTION:
Wear gloves to avoid cutting
fingers on sharp edges.
REAR
WAL_
TEMPLATE
Centerline ,
Draw a VerticalLine
'
on Wallfrom Center
notches
i____ of Top Cabinet
HoleC
HoleB Horizontal Line
Draw a Horizontal line on wall from
bottom of "Rear Wall Template".
1. Draw a Vertical line on the wall at the center of the
30" wide space.
2. Draw a Horizontal line on the wall at the bottom of
"Rear Wall Template".
3. Drill 5/8" holes for toggle bolts on 3 locations
(Hole A, Hole B, Hole C) but if the location of hole
is same as that of stud, drill a 3/16" hole for wood
screw. In other words, toggle bolt can not be used
to the location of stud.
NOTE: DO NOT MOUNT THE PLATE AT THIS
TIME.
NOTE: Holes A, B and C are inside area E. If none of
A, B and C is in a stud, find a stud somewhere
in area
E and draw a forth circle to line up with the stud. It is
important to use at least one wood screw mounted
firmly
in a stud to support the weight of the
microwave.
Set the mounting
plate aside.
10
:
?7
; ; .
:_
Advertisement
Table of Contents
