Important Safety Instructions - Electrolux E30DF7CGPS5 Installation Instructions Manual

WAL
35 7/8" Min.
(91.1 cm Min.)
If there is a wall:
9 Min.
22.9 :m
Left side
/
13" Max.
(33 cm Max.)
If there is a wall:
9" Min.
-(22.9 cm Min.)
- Right side
D
junction box
location
24" Min.
(61 cm Min.)
24 1/2" Max.
(62.2 cm Max.)
Do not pinch the power supply cord between the range
and the wall.
Do not seal the range to the side cabinets.
NOTE: 28" (71.1 cm) minimum clearance between the
cooktop and the bottom of the cabinet when the bottom
of wood or metal cabinet is protected by not less than
1/4" (0.64 cm) flame retardant millboard covered with
not less than No. 28 MSG sheet metal, 0.015" (0.4 ram)
stainless steel, 0.024" (0.6 ram) aluminum, or 0.020"
(0.5 ram) copper.
34" (86.4 cm) minimum clearance when the cabinet is
unprotected.
Figure 2 - 36" Range (30" Range, see page 1)
A. HEIGHT B. WIDTH C. DEPTH TO D. HEIGHTOF E. DEPTH WITH F. HEIGHTOF &MINIMUM
' FRONT O FRANGE COOKTOP ' DOOR OPEN COUNTERTOP CUTOUT W IDTH
41 5/8"(105.7 cm)Min. 35 7/8" 27 ½" 35 3/4" (90.8cm) Min. 47 3/8" 36" (91.4cm) Standard 36 1/16"
425/8"(108.3 cm)Max. (91.1cm) (69.9cm) 36 3/4"(93.3cm) Max. (120.3cm) 353/4"(90.Scm)Min. (91.6cm)
Important Notes to the Installer
1. Read all instructions contained in these installation
instructions before installing range.
2. Remove all packing material from the oven
compartments before connecting the electrical supply
to the range.
3. Observe all governing codes and ordinances.
4. Be sure to leave these instructions with the consumer.
5. Note: For operation at 2000 ft. elevations above see
level, appliance rating shall be reduced by 4 percent
for each additional 1000 ft.
Important Note to the Consumer
Keep these instructionswith your owner's guide for future
reference.
Optional Items Available:
• A Cooktop Trim, if you want to remove the actual 6"
Stainless Steel Backsplash.
• A 9" (22.9 cm) Stainless Steel Backsplash
• A 12" (30.5 cm) Stainless Steel Backsplash
Those kits can be ordered for purchase through an Electrolux
ServiceCenter at 1-877-4ELECTROLUX (1-877-435-3287).
IM PORTANT SAFETY
INSTRUCTIONS
Installation of this range must conform with local codes
or, in the absence of local codes, with the National Fuel
Gas Code ANSI Z223. l--latest edition.
When installing in a manufactured (mobile) home,
installation must conform with Manufactured Home
Construction and Safety Standard, title 24CFR, part 3280
[Formerly the Federal Standard for Mobile Home
Construction and Safety, title 24, HUD (part 280)] or,
when such standard is not applicable, the Standard for
Manufactured Home Installation, ANSI Z225.1/NFPA
501A-latest edition, or with CAN/CSA-Z240 MH, or with
local codes.
This range has been design certified by CSA
international. As with any appliance using gas and
generating heat, there are certain safety precautions you
should follow. You will find them in the Use and Care
Guide, read it carefully.