Advertisement
5. LED Indicators
On the front of the SoloCAT HD™ chassis there is a horizontal
block of four (4) green LED's that is marked "Status" on the
chassis just above the LED's. From Left to Right this is an
explanation of their activity:
1.
#1 LED indicates normal operations and will flash
once a second with HDCP pass through.
2.
#2 LED indicates a valid link between the transmitter
and receiver.
3.
#3 LED HDMI mode
4.
#4 LED power indicator
EIA/TIA-568-B termination is highly
recommended for best results
EGISTR11ATION
Advertisement
