Table of Contents
Advertisement
Available languages
Available languages
INSTAM TIONINSTRUCTIONS
BeforeYouStart
4.
Pull yellow shipping strap firmly, until both ends are
completely removed from washer.
NOTE: To prevent floor damage, set the washer onto cardboard
before moving across floor.
Remove Shipping Strap
Removing the shipping strap is necessary for proper operation. If
the shipping strap is not removed, the washer will make excessive
5. Check that the two (2) cotter pins were removed with the
shipping strap.
noise.
1. Move the washer to within approximately 3 ff (90 cm) of the
final location.
2. The washer must be in the upright position and not tired
before removing the shipping strap.
3.
Locate the yellow shipping strap on the rear of the machine
near the bottom.
I
.4_
q_,
n
A. Yellow shipping strap
Advertisement
Table of Contents
