Advertisement
In the event of a fault occurring during operation, check first if the
fault is due to an operation error. You can repair the following faults
yourself.
The appliance does
not run.
The temperature inside
the appliance is not
low enough.
Excessive noise
from the appliance.
If none of these circumstances applies and you are not able to
repair the fault, please Contact the service point.
1. It is not switched on properly,
or mains plug properly inserted
in the socket.
2. The thermostat knob is turned to
position "0".
3. Supply voltage is too low.
1. The appliance is too full of food.
2. The appliance is located too near
a source of heat.
3. The door is not properly closed or
is opened too frequently.
4. The vent grille is covered over.
The appliance is not standing
securely on the ground.
7
Advertisement
