Haier household refrigerator user manual (12 pages)
Summary of Contents for Haier BC-76
The manufacturer keeps on developing various types of refrigerators, so he has the right to modify designs, products and technical data without further notice. MODEL RQ-85M BC-76 REFRIGERATORS OPERATING INSTRUCTIONS No. 0711 6015...
WARNING: If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
FIGURATION OF THE REFRIGERATOR TECHNOLOGY DATA Model Climate class Anti-shock safety classification Net capacity Gross capacity Voltage Watt Refrigerant BC-76 220V,60Hz BC-76...
NOTICE The power supply The power supply for appliance is for appliance is 220V, 60Hz 240V, 50Hz single phase. It is not recomended to use any extension cords. Connect the appliance with a properly earthed three-wire plug and socket with a special use. SETTING UP The appliance can be placed with its rear panel directly against the wall.
Pos. “1”,Pos. “4”, Pos. “0” shows the power is cut off. STORING FOOD The temperatures in different positions inside the refrigerator are different due to different refrigeration distribution.Thus when store food, select proper position to meet your needs.
NOTES ON STORAGE Where necessary, food should be packed in bags, avoiding giving off strong odours or getting wet or dry. Hot food or liquid must be allowed to cool to room temperature before placing in it. CLEANING The appliance can only be cleaned at drawn network plug. Clean it with lukewarm water containing a little detergent.
DEFROSTING 4~6mm NOTES If the appliance remains out of use for some time, pull out the plug to disconnect the appliance from power supply. Clean the interior as described above to prevent odours from forming inside. When defrosting, switch off the appliance.
3)Install the left hinge and hinge mount (two items of accessory parts) onto the corresponding location at the left upper corner of the refrigerator body with Screws removed from the right hinge. 4) Dismantle the shaft from the lower hinge, put it into the hole on the left side and fasten it securely.
In the event of a fault occurring during operation, check first if the fault is due to an operation error. You can repair the following faults yourself. The appliance does not run. The temperature inside the appliance is not low enough. Excessive noise from the appliance.