Specifications; Host Interface Board; Host Expansion Board - One Stop Systems Max Express OSS-KIT-EXP-4500 User Manual

2 Specifications

2.a. Host interface board specifications
Electrical/Mechanical Specifications
Form Factor:
Dimensions (H x L):
External Connectors:
Board Indicators:
Power Consumption (designed to meet the following conditions
Operating Environment (designed to meet the following conditions)
Temperature Range:
Relative Humidity:
Shock:
Vibration:
Redriver
Pericom PIEQX4401
Agency Compliance Designed to meet, but not tested
2.b. Host expansion board specifications
CPCI Interface
Cable Interface
Electrical/Mechanical
Operating Environment
Agency Compliance:
One Stop Systems, Inc.
Rev. A
ExpressCard/34
1.34 x 5.01 inches (34 x 127.3mm)
One PCIe x4 cable connector
Power On / Cable Present LEDs
3W typical, 3.3V@1A
0° to 55°C (32° to 131°F)
10 to 90% non-condensing
30g acceleration peak (11ms pulse) no cable connected
5-17 Hz 0.5" double amplitude displacement; 7-2000Hz, 1.5g acceleration.
UL60950, FCC Class B, CE safety and emissions
•
32 or 64 bit at 66 or 33MHz
•
3.3V I/O only
•
Internal arbiter supports up to 4 external masters
•
Seven CPCI slots (up to 7 PCI clock/bus requests)
•
Enhanced Intel SpeedStep Technology
•
Single port x4 link width
•
100MHz reference clock
•
256 byte maximum payload size
•
Automatic link training (auto-negotiate to largest common width)
•
Advance flow control, CRC and error reporting
•
Molex 75586-0010 connector
•
3U or 6U CPCI system master or peripheral slot
•
3U [H x L x W] dimensions of 3.937 x 6.299 x 0.6" (100 x 160 x 1.6mm)
•
Tundra Tsi384
•
32/64-Bit/33/66MHz CPCI bus on connectors J1 & J2
•
Four green front panel indicators
•
Automatic downstream select cable dip switches
•
Temperature range 0 to 50C (32 to 122F)
•
Relative Humidity 5 to 90% non-condensing
•
Shock: 5-17 Hz 0.5" double amplitude displacement; 7-2000Hz, 1.5g acceleration
+Designed to meet UL 60950, FCC Class B, CE safety and emissions
OSS-KIT-EXP-4500
Page 5