Related Manuals for One Stop Systems Max Express OSS-KIT-EXP-4500
Summary of Contents for One Stop Systems Max Express OSS-KIT-EXP-4500
- Page 1 User Manual, PCIe x4 Host Cable Adapter (HIB2) OSS-KIT-EXP-4500 One Stop Systems, Inc. Host Cable Adapter User Manual Rev. A...
-
Page 2: Table Of Contents
3.b. Removing PCIe cable........................6 3.c. Installation instructions for a 2-slot backplane .................6 4. Technical Information 4.a. LEDs ..............................7 4.b. Block Diagram ...........................7 4.c. Pin assignments..........................8 4.d. Signal Descriptions ..........................12 5. Ordering Information One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 2... -
Page 3: Description
The Host Interface Board (HIB2) sits in the host machine and cables to the Host Expansion Board (HEB2). The Host Expansion Board site in a CPCI/CPCE Chassis. Host interface board PCIe x4 cable Host expansion board One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 3... -
Page 4: Host Interface Board
PCIe x4 Card edge connector connector Locking card connector 1.d. Conceptual architecture Upstream host PCIe backplane in adapter the host enclosure Compact PCI backplane Downstream host PCIe x4 cable expansion board (HEB2) One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 4... -
Page 5: Specifications
Relative Humidity 5 to 90% non-condensing • Shock: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration Agency Compliance: +Designed to meet UL 60950, FCC Class B, CE safety and emissions One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 5... -
Page 6: Installation Instructions
Turn on the host system. Signals across the PCIe cable will cause the test backplane to power up as well. The power and cable LEDS on both HIB2 x4s should be on, indicating that the host system is communicating with the endpoint board. One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. -
Page 7: Technical Information
PCIe Rx Redriver +3.3v CPRSNT# LEDs Cable Present/ Pwr Downstream Upstream LEDs x4 PCI Express x4 PCI Express PCIe lane Cable Connector Card Edge Connector status *Clock direction shown in Host configuration One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 7... -
Page 8: Pin Assignments
Receiver differential pair, Lane 2 Ground PERn2 PETp3 Ground Transmitter differential pair, PETn3 Ground Lane 3 Ground PERp3 Receiver differential pair, Lane 3 RSVD Reserved PERn3 PRSNT2# Hot-Plug presence detect Ground Ground RSVD Reserved One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 8... - Page 9 Lane 1 PERn1 Differential PCI Express receiver Lane 1 Ground reference for PCI Express receiver Lanes PERp2 Differential PCI Express receiver Lane 2 PERn2 Differential PCI Express receiver Lane 2 One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 9...
- Page 10 3 Although support of CWAKE# is optional from the board side connector perspective, an allocated wire is mandated for the cable assembly. 4 Board side pin-out on both sides of the Link is identical. The cable assembly incorporates a null modem for the PCIe transmit and receive pairs. One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 10...
- Page 11 PETp2 PERn2 PETn2 PERp3 Differential Pair PETp3 PERn3 PETn3 PWR_RTN PWR_RTN PWR_RTN PWR_RTN CWAKE# Hook-up Wire CWAKE# CPERST# Hook-up Wire CPERST# Overall Cable Backshell Chassis Ground Chassis Ground Back shell Braid One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 11...
-
Page 12: Signal Descriptions
PoWeR: Provides local power for in-cable redriver circuits. Only needed on long cables. Power does not go across the cable.) PWR_RTN PoWeR ReTurN: Provides local power return path for PWR pins. CWAKE# Cable WAKE CPERST# Cable PCI Express Reset One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 12... -
Page 13: Ordering Information
5. Ordering Information OSS-KIT-EXP-4500 One Stop Systems, Inc. OSS-KIT-EXP-4500 Rev. A Page 13...