Description The Host Cable Adapter (Part # OSS-PCIe-HIB2-x4-H) allows communication between a processor and an I/O port. The OSS- PCIe-HIB2-x4-T is used as a target in a One Stop Systems 2 slot backplane (OSS-EBP-2000). Slot Cover (also available in low profile 3.35"...
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration. Redriver Pericom PI2EQX4402 Agency Compliance Designed to meet, but not tested UL60950, FCC Class B, CE safety and emissions One Stop Systems, Inc. Host Cable Adapter User Manual Rev. A...
Page 5
+3.3v CPRSNT# LEDs Cable Present/ Pwr Upstream Downstream LEDs x4 PCI Express PCIe lane status x4 PCI Express Card Edge Connector Cable Connector *Clock direction shown in Host configuration One Stop Systems, Inc. Host Cable Adapter User Manual Rev. A...
Page 6
Ground PERn2 PETp3 Ground Transmitter differential pair, Lane 3 PETn3 Ground Ground PERp3 Receiver differential pair, Lane 3 RSVD Reserved PERn3 PRSNT2# Hot-Plug presence detect Ground Ground RSVD Reserved One Stop Systems, Inc. Host Cable Adapter User Manual Rev. A...
Page 7
PC. For example, the One Stop Systems quad USB board can be installed in the second slot allowing four USB devices to be operated from the remote computer One Stop Systems, Inc.
One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the One Stop Systems manufactured product, such as a power supply, backplane, other chassis components or CPUs. One Stop Systems is not liable for any defects in material or workmanship of any peripherals, products or parts, which One Stop Systems does not design or manufacture.