Advertisement
IMPORTANT SAFETY
INSTRUCTIONS
If the informationinthis manual is notfollowed
exactly, a fire or electricalshock may result causingproperty
damage, personal injuryor death.
• ALL RANGES
CAN TIP
• INJURYTO
PERSONS
COULD
RESULT
• INSTALL
ANTI-TIP
DEVICE
PACKED
WITH
RANGE
• SEE INSTALLATION
INSTRUCTIONS
Important
Notes
to the
Installer
1,
Read
all instructions contained
in these installation
instructions before installing range.
2.
Remove all packing material from the oven compartments
before connecting the gas and electrical supply to the
range,
3.
Observe all governing codes and ordinances.
4.
Be sure to leave these instructions with the consumer.
Important
Note to the Consumer
Keep these instructionswith your owner's guide for future
reference.
As when using any appliance generating heat, there are
certain safety precautionsyou should follow.These are
listed in the Use & Care Manual. read it carefully.
Be sure yourrange isinstalledand grounded properlyby
a qualified installer or service technician.
Make sure the wall coverings around the range can
withstand the heat generated by the range.
To eliminate the need to reach overthe surface elements,
cabinet storage space above the elements should be
avoided.
Before Starting
Tools You Will Need
For leveling legs and Anti-Tip Bracket:
Adjustable wrench or channel lock pliers
5/16" Nutdriveror Flat Head Screwdriver
Electric Drill & 1/8" Diameter
Drill Bit (Masonry
Drill Bit if
installing in concrete)
For electrical supply connection:
1/4" & 3/8" Socket driver or Nutdriver _1]====_
Additional
Materials
You Wig Need
Power Supply Cord or
Copper Electrical Widng& Metal Conduit (for hardwiring)
Normal Installation Steps
1. Anti-Tip
Bracket
Installation
Instructions
Important
Safety
Warning
To reduce the risk of tipping of the range, the range must be
secured to the floor by properly installed anti-tip bracket and
screws packed with the range. Failure to install the anti-tip
bracket will allow the range to tip over if excessive weight is
placed on an open door or if a child climbs upon it. Serious
injury might result from spilled hot liquids or from the range
itself.
If range is ever moved to a different location, the anti-tip
brackets must also be moved and installed with the range.
Instructions are provided for installationin wood or cement
fastened to either the floor or wall. When installed to the wall,
make sure that screws completely penetrate dry wall and are
secured in wood or metal. When fastening to the floor orwall,
be sure that screws do not penetrate electrical wiring or
plumbing.
A. Locatethe Bracket Using the Template- (Bracketmay
belocatedon either theleftor rightside ofthe range. Use
the informationbelowto locatethe bracket if template is
not available). Mark the floor or wall where left or right
sideofthe rangewillbe located. If rear ofrange isagainst
the wall or nofurtherthan 1-1/4"from wallwhen installed,
you may use the wall or floor mount method. If molding
is installed and does not allow the bracket to fit flush
againstthewall, remove moldingor mountbrackettothe
floor. For wall mount, locate the bracket by placingthe
back edge of the template against the rear wall and the
side edge oftemplate on the mark made referencingthe
side of the range. Place bracket on top of template and
mark locationofthe screw holes in wall. If raar of range
isfurther than 1-1/4"from the wall when installed,attach
bracket to the floor. For floor mount, Iocatethe bracket
by placing back edge of the template where the rear of
the range willbe located. Mark the locationof the screw
holes, shown in template.
2
Advertisement
