Page 1
Installation Instructions Full Size Tumble Action Washers Before beginning installation, carefully read these instructions• This will simplify installation and ensure the washer is installed correctly and safely• Leave these instructions near the washer after installation for future reference• NOTE: The electrical service to the washer must conform with local codes and ordinances and the latest edition of the National...
Page 2
PRE-INSTALLATION REQUIREMENTS in accordance with all local codes and ordinances or in the absence of local codes, with the National Tools Required for Installation: Electrical Codes, ANSI/NFPA 70 (latest edition). 1/4 in. nut driver If in doubt, call a licensed electrician. DO NOT 3/8 in.
ROUGH-IN DIMENSIONS 263A (67.9) (43.2) 24 3,4 (7 3) "_ (62.9) (152.4) (ls% (91.5) 11/2 V_ Water Inlets Under Power Counter iiiii! Cord (80.3) 345/6 331/2 (85) (87.9) BACK SIDE inch (cm) Adjustable Legs Roller Wheels UNDER COUNTER INSTALLATION If an under counter* installation is desired, the washer MUST have a top sheet kit installed, P/N 131445600. Kit is available from an authorized parts distributor.
LOCATION OF YOUR WASHER DO NOT INSTALL YOUR WASHER: In an area exposed to dripping water or outside Remove the styrofoam base. weather conditions. The ambient temperature Carefully return the washer to an upright position and remove the carton. should never be below 60 degrees F (15.6...
1-800-944-9044 for the Frigidaire Company Authorized Parts Distributor nearest you. Form a U shape on the end of the drain hose with the hose pointed toward the drain. Place in a...
Page 6
[DO NOT PRINT P/N 131803200 m English Page 6 left intentionally blank.]...