Unpacking; Packing Materials; Safety; Packing Information - Rivera R100-212A Owner's Manual

Packing Information

Unpacking

Before you plug in, inspect your R Series or Custom shop amp for any damage. Your
amp was inspected and sound-tested before shipment, but transportation can
sometimes be tough. Check that the FS-7 Footswitch and power cord have been
shipped with the amp. If parts are missing, or if any damage has occurred, contact your
dealer.

Packing Materials

We designed the original box and packing materials to protect your amp during
shipment. Save them. If you ever need to send your amp to us or to anyone else, the
original box and packing materials will ensure safe transit.

Safety

Throughout this manual, the lightning flash with an arrowhead symbol
within a triangle is intended to alert you to the presence of un-insulated
"dangerous voltages" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Warning: There are no user-serviceable parts inside of this amplifier.
Warning: To avoid the risk of shock or fire, do not expose this amplifier to moisture. Do
not remove the chassis from its cabinet, or remove metal covers from chassis parts.
Removing the chassis from its cabinet exposes extremely dangerous high voltages.
There are no user-serviceable parts inside. Hazardous voltages are present inside the
chassis. Refer all servicing to qualified personnel.
The exclamation point within a triangle is intended to alert the user to
the presence of important operating and maintenance (servicing)
instructions in the literature that accompanies the product.
Caution: To avoid a fire hazard, always replace the fuses with the same type and
rating.
Caution: Always replace the line cord (mains supply) with the proper type.
Caution: Always turn off the amplifier before making or unplugging any speaker
connections.
Always transport your amplifier securely, preferably in a suitable flight case or packing
carton. Before operating your amplifier, be sure the speakers used are properly
connected. For countries where 220 to 240 volts AC is encountered, make sure that you
R Series V1.0 p 3