Connecting The Amp With Other Gear; Speakers - Rivera R100-212A Owner's Manual

The Effects Loop Send is configured so that it is always active, so you can use it as a
variable output. Note that if you use the Send to drive slave amps, etc., and have
nothing plugged into the Return jack, the signal still passes from the preamp to the
power amp. You can also use it to drive a Rivera Sub 1 or Sub 2 Powered sub cabinet.
Speaker – Chubster 40, R30-112
The speaker in your Thirty Twelve is a specially designed Celestion 12" with a 55-watt
power-handling capacity. It was selected for its classic tone and ability to deliver lots of
volume. To protect it, keep the grille on your amp at all times, and don't use the back of
the amp for storing any sharp objects.
Speakers – Chubster 55, R55-112 and R100-212
The speakers in your Fifty-Five Twelve or Hundred Duo Twelve are specially designed
Celestion 12" G12T-75 or G12T-85 models with at least a 75-watt power-handling
capacity. They were selected for their classic tone and ability to deliver lots of volume.
To protect them, keep the grille on your amp at all times, and don't use the back of the
amp for storing any sharp objects.
Speakers – Suprema
The speaker in your Suprema is a specially designed Celestion 12" Vintage 30 8 Ohm
model. On special order, 12" G12T-75 or G12T-85 models with at least a 75-watt
power-handling capacity are installed as an option. They were selected for their classic
tone and ability to deliver lots of volume. To protect them, keep the grille on your amp at
all times.
Connecting Your Rivera Amp With Other Gear
The following illustrations will help you to properly connect your Rivera R Series amp to
other amps, extension speaker cabinets, and recording and P.A. gear. Make sure the
amp and all other gear are turned off whenever you make or change any connections.
R Series V1.0 p 15