GE Monogram ZDP48N4G Installation Instructions Manual page 6

Design hKbrmadon
Advar ,ce
Refer to "Di men si]ms am]d CJ earm] ce s" for
appropriate placement and necessary dear-
mices/1hem/ p]mmh]g the im]sta]]atiom
* Cab] m] e trv carol not be h] stall ed direcdv above
the range.
* We recom m era/d the imi s ta]]ati]m of a ve]] t
hood above
the sm'lhce.
-The vent hood mllst be at ]east 24" deep.
-The ve]/t hood mllst be the same/lidth as
the range.
-For
48"
m ode]
s, /t e recom m
el/d
th e veil t
hood bIo/ler be 1200 (FM.
-For 30" and 36" models, we recommend the
vent hood blower be 600 CFM.
*Working areas ai!jacent to the range sholl]d
have 18" mimlimllm c]earm]ce bettleen
com]tertop mid cabim]et bottom.
* CJ earan ce bet11 eel/rm/ge
an d side wall or
corn bllstib] e m ateH a] m list be at ]east ] 2" on
each side.
If the range is installed in an island:
*A]hal ]2" mh/. c]earm]ce at the back to
combllstib]e materials.
*A]]oll 36" mira above the cooking sm'fhce to
comb_lstib]e materials.
e For 48" m ode] s,/l e recom m el/d the ve]] t
hood b]o/l er be ] 200 CFM.
* For 30" am]d 36" m ode] s,/l e recom men d the
vent hood be 600 CFM.
* Installation mllst com/Jti_rm ttit]] local codes.
h] the abse_]ce of local codes, the rm]ge
must (omply/lit]i the Natio]]a] Fuel (;-as
('.ode, ANSI Z223A, latest edition.
A.G.A. approved.
7bots &-"
Req .tired:
* Measm'h]g tape
* Carpenter's sqllare
* Pipe and tittim]gs as reqLlired.
* Man ila] gas ]i m/e sh m-off valve.
* (;as pressure regulator (supplied)
* i _arge flat-Made sere11 driver
* Pipe/l ten ch
* Drill an d appropriate bi ts
* Satety glasses
* Gas-res] start t pi pe.joi m] t sea]an t
* 5 foot, 5/8" AGA-certified flex]Me metal gas
supply line.
-If reqllh'ed bv local codes, ilse solid pipe
Note: Pro'chase role11flexible lim]e. DO NOT
[ISE OI_D, PREVIOI ISI5 [/SED FI_EXIBI_E
1 _INE.