Saving The Console Switch Configuration Or User Database - HP Server Console Switch G2 User Manual

From the Tools list, select Upgrade Firmware.
2.
NOTE:
Select one of the following options to load the firmware file:
3.
Filesystem—Select Browse to specify the location of the firmware upgrade file.
o
TFTP—Enter the server IP address and firmware file to load.
o
FTP—Enter the server IP address and firmware file to load. A username and password is required for
o
authentication.
HTTP—Enter the server IP address and firmware file to load. A username and password is required
o
for authentication.

Saving the console switch configuration or user database

To save or restore the console switch configuration or user database, you must be logged in to the console
switch from the remote OBWI. You can save the configuration of a switch, the managed devices, and the
local user database to a file. By saving your configurations to a file, you can restore previous configurations
to your console switch.
To save the console switch configuration or user database:
Select Unit View>Appliance>Overview. The Unit Overview page appears.
1.
IMPORTANT:
operations.
Select either Save Appliance Configuration or Save Appliance User Database. The Save Appliance
2.
Configuration or Save Appliance User Database page appears.
Select the type and location where you want the file saved:
3.
Filesystem
o
TFTP
o
FTP
o
HTTP PUT
o
Enter an Encryption Password.
4.
The Filesystem option is only available if you are logged in from the remote OBWI.
While upgrading the firmware, do not power off the console switch or attempt any
Configuring the console switch 34