Connecting The Interface Adapter - HP Server Console Switch G2 User Manual

Connecting the interface adapter

NOTE:
server, test the functionality of your keyboard and mouse at the BIOS level before you load your
operating system.
Connect a UTP CAT5 cable to the interface adapter connection port on the console switch.
1.
Connect the other end of that same UTP CAT5 cable to the RJ-45 connector on the interface adapter.
2.
Connect the interface adapter to the appropriate connectors on the server.
3.
Repeat steps 1 through 3 to connect any other servers or appliances to the console switch.
4.
The following figure shows an example configuration for the console switch system with an interface adapter.
Item Description
Server
1
Console switch
2
USB 2.0 interface adapter with Virtual Media
3
PS2 interface adapter with Virtual Media
4
If you use the HP USB with Virtual Media interface adapter to connect to your ProLiant
Installing the interface adapter 24