XTS DVR72XX-V User Manual page 92

Parameter
System
Time
Sync PC
Data
Format
Data
Separator
Time
Format
DST
Language
HDD Full
Pack
Duration
Device No
Video
Standard
7.3.2.2 Encode
Encode interface is shown as in
Function
Here is for you to modify system time. Please click Save button after
your completed modification
You can click this button to save the system time as your PC current
time.
Here you can select data format from the dropdown list.
Please select separator such as – or /.
There are two options: 24-H and 12-H.
Here you can set day night save time begin time and end time. See
Figure 7-24 and Figure 7-25.
You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
There are two options: stop recording or overwrite the previous files
when HDD is full.
When current working HDD is overwriting or it is full now, system
stops record.
If current working HDD is full now, system goes to overwrite the
previous file.
Here you can select file size. The value ranges from 1 to 120.Default
setup is 60 minutes.
When you are using one remote control (not included in the
accessory bag) to manage multiple devices, you can give a serial
numbers to the device.
There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not modify.
F igure 7-26 .
X 4 5 4 H 4 5 4 H 4 5 4 H 3 9 6 H X
92