PCMCIA External Hard Disk User Manual page 23

5. Select 'PCMCIA HARDDISK' and then click
OK.
6. Follow the on-screen instruction to continue. After the installation is complete, Windows will
prompt you to restart to activate the new device driver. Restart and power-off the computer.
7. Ensure the PCMCIA interface cable and then the external power connections (if you are using the
external power) are made as described in Hardware Installation. Slowly insert the PC Card of
interface cable into the PCMCIA socket of computer and press firmly until the connector is seated
(Please note that the PC Card is keyed to guide for proper insertion).
8. Power-on the computer, after boot into Windows, the external hard disk will be assigned a drive
letter in 'My Computer', the drive is ready for use.
- 17 -